For sure! Good luck! I’d suggest not paying for DS until you hit the free limit, then you can decide if you want to pay or wait a day for 25 more downloads. To be honest, I doubt you will hit the limit but I could be wrong.
I’m not sure where nextcloud comes in but I get your point. Cheers!
The free limit is 25 api hits, 5 downloads. It doesn’t say per day, but even still if that is the case, 5 is too low. If it is per day I only need the 15€ plan though at 1,000 API 100 DL instead of the 25€ plan. I’ll be waiting until friday to get that and (likely) eweka though in any case.
Nextcloud comes in for storage/offsite access, as I am a datahoarder, I plan to figure out if I can run nextclout, jellyfin, and a small matrix server off the same server, but I have to buy a small server first, or figure out a VPS. Lotta stuff, one step at a time.
Aye, my bad. 5 Download 25API is listed in the “Daily Limits” column so you’re right.
You’re going down the same path I did awhile ago. It’s super fun when things work. Not so much when it doesn’t. If you want me to add to that list. Add Tailscale (and maybe Headscale ) to that list. I cant get over how cool it is. I’ve installed the app on my phone/Laptop and can access everything in my house while I’m away.
I have a couple raspberrypi4 and Lenovo M93p hosting all my stuff and I picked RackNerd from this list.
Alright you’ve hooked me lol. So, Radarr huh? I’m not sure if that is the thing I want or not since there are so many *arrs and it is a bit confusing, is that the one that lets me do stuff like search “venture bros” on DS and click “download episodes” or something and it downloads them and organizes them by season?
Thanks again for all your help before and on this question!
Radarr is Movies only. You’ll add your indexer username/password into it for it to search for movies you want. You’ll add sabnzbd for it to automatically download the movies. The download folder will need to be the same folder radarr has access to to move it to the complete folder.
The complete folder will be where Plex/jellyfin/whatever library is.
Sonarr is exactly the same thing but it is for TV shows.
I’m out until tomorrow evening. Once I get back home I can look at my setup and provide more specifics.
Basically you add everything into sonarr/radarr and it should do all the work for you. You just tell it what you want.
Awesome thanks, it sounds like I need Sonarr more than Radarr, I don’t mind manual searches for movies and then I can pick the one I want, but shows with 5 seasons and 13ep a season is a little much lol.
Don’t go through too much trouble on my acct looking at the set up, I think I may be able to set it up with the description you gave already and also the Sonarr docs, and for now since my set up is just download no stream I don’t have to worry about jellyfin or anything, I just want it to move everything labeled like “Superjail.S01E02.” Into folders by show name and season if Sonarr can do that.
Thanks again! I’ll check out Sonarr today/tomorrowish!
Into folders by show name and season if Sonarr can do that.
Yep, that’s exactly what it does.
Sonar settings profiles - What version and quality of TV you’re looking for.
settings indexers - This is where you’ll put your DS account. Plus button, Newznab under “presets” you’ll see DS. Add your API key and test.
settings downloadclients - This is the URL/IP to sab, you’ll need to set it up and get an API key from it.
settings connect - This is where you can link Plex to tell it there’s a new ep.
Lets say you add Superjail to Sonarr in Series -> Add new. It’ll watch your indexer (DS) for that. as soon as the ep is on DS it’ll download the nzb and send it to sabnzbd. SAB will download it from your usenet provider.
In sab -> config -> folders the “Completed Download Folder” needs to be the exact same and accessible from sonarr. Mine is /downloads/complete/ this folder needs to be the same exact in SAB and Snoarr. The other thing in SAB is you need to put your usenet provider under sab.example.ca/config/server/. The other settings are useful, read them, set labels, etc.
Once SAB is done downloading it, it will be put into /downloads/complete/ and Sonarr will pick it up and move it to the Libary location Sonar has setup for Superjail
After you add a show, You can hit the search icon within the show in sonarr and have it look for old EPs. It’ll do all of this automatically but you do have to click the search icon and tell it to go look for the old stuff.
After that initial add+search it’ll keep all your stuff updated. If a new ep comes out in the middle of the night it’ll grab it for you.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !piracy@lemmy.dbzer0.com
⚓ Dedicated to the discussion of digital piracy, including ethical problems and legal advancements.
For sure! Good luck! I’d suggest not paying for DS until you hit the free limit, then you can decide if you want to pay or wait a day for 25 more downloads. To be honest, I doubt you will hit the limit but I could be wrong.
I’m not sure where nextcloud comes in but I get your point. Cheers!
The free limit is 25 api hits, 5 downloads. It doesn’t say per day, but even still if that is the case, 5 is too low. If it is per day I only need the 15€ plan though at 1,000 API 100 DL instead of the 25€ plan. I’ll be waiting until friday to get that and (likely) eweka though in any case.
Nextcloud comes in for storage/offsite access, as I am a datahoarder, I plan to figure out if I can run nextclout, jellyfin, and a small matrix server off the same server, but I have to buy a small server first, or figure out a VPS. Lotta stuff, one step at a time.
Aye, my bad. 5 Download 25API is listed in the “Daily Limits” column so you’re right.
You’re going down the same path I did awhile ago. It’s super fun when things work. Not so much when it doesn’t. If you want me to add to that list. Add Tailscale (and maybe Headscale ) to that list. I cant get over how cool it is. I’ve installed the app on my phone/Laptop and can access everything in my house while I’m away.
I have a couple raspberrypi4 and Lenovo M93p hosting all my stuff and I picked RackNerd from this list.
Thanks for all the advice, I’ve saved this comment for later! That does sound pretty cool!
Alright you’ve hooked me lol. So, Radarr huh? I’m not sure if that is the thing I want or not since there are so many *arrs and it is a bit confusing, is that the one that lets me do stuff like search “venture bros” on DS and click “download episodes” or something and it downloads them and organizes them by season?
Thanks again for all your help before and on this question!
Radarr is Movies only. You’ll add your indexer username/password into it for it to search for movies you want. You’ll add sabnzbd for it to automatically download the movies. The download folder will need to be the same folder radarr has access to to move it to the complete folder.
The complete folder will be where Plex/jellyfin/whatever library is.
Sonarr is exactly the same thing but it is for TV shows.
I’m out until tomorrow evening. Once I get back home I can look at my setup and provide more specifics.
Basically you add everything into sonarr/radarr and it should do all the work for you. You just tell it what you want.
Awesome thanks, it sounds like I need Sonarr more than Radarr, I don’t mind manual searches for movies and then I can pick the one I want, but shows with 5 seasons and 13ep a season is a little much lol.
Don’t go through too much trouble on my acct looking at the set up, I think I may be able to set it up with the description you gave already and also the Sonarr docs, and for now since my set up is just download no stream I don’t have to worry about jellyfin or anything, I just want it to move everything labeled like “Superjail.S01E02.” Into folders by show name and season if Sonarr can do that.
Thanks again! I’ll check out Sonarr today/tomorrowish!
Yep, that’s exactly what it does.
Sonar settings profiles - What version and quality of TV you’re looking for.
settings indexers - This is where you’ll put your DS account. Plus button, Newznab under “presets” you’ll see DS. Add your API key and test.
settings downloadclients - This is the URL/IP to sab, you’ll need to set it up and get an API key from it.
settings connect - This is where you can link Plex to tell it there’s a new ep.
Lets say you add Superjail to Sonarr in Series -> Add new. It’ll watch your indexer (DS) for that. as soon as the ep is on DS it’ll download the nzb and send it to sabnzbd. SAB will download it from your usenet provider.
In sab -> config -> folders the “Completed Download Folder” needs to be the exact same and accessible from sonarr. Mine is /downloads/complete/ this folder needs to be the same exact in SAB and Snoarr. The other thing in SAB is you need to put your usenet provider under sab.example.ca/config/server/. The other settings are useful, read them, set labels, etc.
Once SAB is done downloading it, it will be put into /downloads/complete/ and Sonarr will pick it up and move it to the Libary location Sonar has setup for Superjail
Good luck!
Awesome thanks for all the help! I’ll get this set up shortly! One final question, you say:
Does this only watch new uploads, or would it also search through old uploads too? The show is already over and uploaded.
After you add a show, You can hit the search icon within the show in sonarr and have it look for old EPs. It’ll do all of this automatically but you do have to click the search icon and tell it to go look for the old stuff.
After that initial add+search it’ll keep all your stuff updated. If a new ep comes out in the middle of the night it’ll grab it for you.