I just recently started my journey setting up Plex with *Arr and have had a blast. I have the setup running on a raspberry Pi. Before I start buying a bunch of external hard drives, I went searching for some dedicated server hardware to comparison shop. Am I crazy to consider buying an old tower server for this, or will a raspberry Pi work just fine for this purpose? I don’t have that much experience but I do enjoy a good challenge.
I currently don’t require much transcoding but I imagine I will as time goes on. I would rather not have to police the filetypes for downloads as heavily. That being said, It will be an always on server so power is a consideration. I haven’t thought about how expensive it would be to run a tower server vs raspberry Pi.
You could also ask over in !homelab@lemmy.ml . I mostly mention the power consumption, because of you an “old tower server” even if cheap might consume quite a bit and efficiency has improved by a lot. So even if the older hardware is cheaper you’d probably get that back from saving electricity over time.
I think it makes sense to think a bit about your needs and budget. Does noise matter? Another question would be how much storage you want and if you need redundancy. SSD prices have fallen quite a bit, so even 4tb SSDs aren’t that expensive anymore.
If you’d be fine with that, then there are quite a few cheap intel based (for quicksync) mini PCs for sale that could be an option.
If you’d want more storage and are looking at larger capacity HDDs, then you’d have to decide if you want to build yourself or buy a prebuild nas.
I’m sadly not quite up to date on what specific models are the best atm.
You could always setup a Tdarr instance on another, powerful server (that you don’t have on all the time) that can crunch through everything to make sure it’s the right file type.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !piracy@lemmy.dbzer0.com
⚓ Dedicated to the discussion of digital piracy, including ethical problems and legal advancements.
I currently don’t require much transcoding but I imagine I will as time goes on. I would rather not have to police the filetypes for downloads as heavily. That being said, It will be an always on server so power is a consideration. I haven’t thought about how expensive it would be to run a tower server vs raspberry Pi.
You could also ask over in !homelab@lemmy.ml . I mostly mention the power consumption, because of you an “old tower server” even if cheap might consume quite a bit and efficiency has improved by a lot. So even if the older hardware is cheaper you’d probably get that back from saving electricity over time.
I think it makes sense to think a bit about your needs and budget. Does noise matter? Another question would be how much storage you want and if you need redundancy. SSD prices have fallen quite a bit, so even 4tb SSDs aren’t that expensive anymore.
If you’d be fine with that, then there are quite a few cheap intel based (for quicksync) mini PCs for sale that could be an option.
If you’d want more storage and are looking at larger capacity HDDs, then you’d have to decide if you want to build yourself or buy a prebuild nas.
I’m sadly not quite up to date on what specific models are the best atm.
You could always setup a Tdarr instance on another, powerful server (that you don’t have on all the time) that can crunch through everything to make sure it’s the right file type.