I have a regular-ass Amazon Fire TV stick 4k max that I use to play my Jellyfin content. It has native hardware support for h.265. I can’t remember the last time it needed a stream transcoded. Of course, it is encumbered with the Amazon ecosystem, but it was cheap.
I also have one of those $20 Walmart Android TV boxes. The UI is a little slow in it but it plays the same Jellyfin content just fine, and you can replace the stock launcher on it with whatever you want.
Is jellyfin good? Several years ago I wrote a very basic php search system and then made another php script to generate a clickable list of every video file in a directory. These 2 put together makes a better than nothing media server that I can use with confidence knowing it’s probably really secure and not sending any data to anyone on the internet.
My setups lan transfer speed is slow all the time for reasons beyond my understanding so I have to find a way to fix that first before I can think about changing my media server software anyway. My 1mb/s download/1.2mb/s upload speed on my server and 4-7mb/s for each other pc is good enough to watch some stuff but it really sucks that after overhead and performance losses, that’s all that’s left of my 400mbits/sec wifi connection. I barely even use it and don’t have any non Linux pcs on my network so it’s not like it’s slow due to actual traffic. Router and wifi card manufacturers are scamming us all. Divide any advertizered wireless network speed by 64 and that’s the maximum you can expect in my experience.
check that you have at least cat6 cables everywhere and that they are not connected into a slow ethernet port somewhere. MY old wifi router only had a single 10mb/s connection for some reason and it took me a solid minute to figure that shit out. if everything is going through wifi something more complicated is happening and I would first check you’re channel isn’t overlapping any neighbors signals and that you’re not trying to put 5g through any walls.
What is your network infrastructure that is giving you those poor performance numbers?
Most consumer all in one routers are crap but not that bad. the file server should always connect to the main hub of the network with Ethernet (whether that be the router, a switch or an all-in-one crap box), these days pretty much everything should be at least 1gigabit.
Are you trying to use wifi for everything? that’s a recipe for disaster unless you really know what you are doing and have multiple APs and careful signal strength and channel management
I am trying to use wifi for “everything”. I know it’s bad but there is no honest to goodness way I can get ethernet to anything except the router and modem. It’s complicated. Even a 60hz ac to ethernet wall plug transceiver has to go through enough breakers and stuff it’s not worth trying.
I forgot which exact router I have but it’s basically the highest end Cisco home router that works with dd wrt. It usually costs $300 on amazon. My internet connection is dsl but I’m not trying to get higher internet speeds, just higher lan speeds.
If my low effort network setup only yields me a maximum of 7mbytes/sec I’m fine with it I just want to be able to get more than 1 meg per second on the one system that needs it the most.
You should consider upgrading to some kind of mesh system then. sure they aren’t perfect, but even a basic 3 node kit could probably increase your throughput ten fold.
If you want to use DDWRT or OpnSense or whatever you can still run it separately and route internet traffic or use it for your DHCP server.
To stream a 4K bluray remux rips on your Lan you need a solid 150mbit minimum between server and player to be reliable for example. I am hardwired all the way except for mobiles, but even on Wi-Fi I can easily pull 400-500mbit real world throughput through most of the house thanks to my Wifi6 setup with multiple APs
Jellyfin is excellent. You can always just download it and run it on whatever you’re running your existing setup on and give it a try. The server’s available for a bunch of platforms.
Jellyfin is great. Worth the time and effort to get it setup. Infuse is worth the money as an AppleTv frontend too.
You will definitely need toimprove your lan speed though. I’drecommende getting off WiFi for as much of the media as you can. If not that, put in triband WiFi connection and wire them in if possible. Mesh will work, but bring your speed down.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !piracy@lemmy.dbzer0.com
⚓ Dedicated to the discussion of digital piracy, including ethical problems and legal advancements.
I have a regular-ass Amazon Fire TV stick 4k max that I use to play my Jellyfin content. It has native hardware support for h.265. I can’t remember the last time it needed a stream transcoded. Of course, it is encumbered with the Amazon ecosystem, but it was cheap.
I also have one of those $20 Walmart Android TV boxes. The UI is a little slow in it but it plays the same Jellyfin content just fine, and you can replace the stock launcher on it with whatever you want.
Is jellyfin good? Several years ago I wrote a very basic php search system and then made another php script to generate a clickable list of every video file in a directory. These 2 put together makes a better than nothing media server that I can use with confidence knowing it’s probably really secure and not sending any data to anyone on the internet.
My setups lan transfer speed is slow all the time for reasons beyond my understanding so I have to find a way to fix that first before I can think about changing my media server software anyway. My 1mb/s download/1.2mb/s upload speed on my server and 4-7mb/s for each other pc is good enough to watch some stuff but it really sucks that after overhead and performance losses, that’s all that’s left of my 400mbits/sec wifi connection. I barely even use it and don’t have any non Linux pcs on my network so it’s not like it’s slow due to actual traffic. Router and wifi card manufacturers are scamming us all. Divide any advertizered wireless network speed by 64 and that’s the maximum you can expect in my experience.
check that you have at least cat6 cables everywhere and that they are not connected into a slow ethernet port somewhere. MY old wifi router only had a single 10mb/s connection for some reason and it took me a solid minute to figure that shit out. if everything is going through wifi something more complicated is happening and I would first check you’re channel isn’t overlapping any neighbors signals and that you’re not trying to put 5g through any walls.
What is your network infrastructure that is giving you those poor performance numbers?
Most consumer all in one routers are crap but not that bad. the file server should always connect to the main hub of the network with Ethernet (whether that be the router, a switch or an all-in-one crap box), these days pretty much everything should be at least 1gigabit.
Are you trying to use wifi for everything? that’s a recipe for disaster unless you really know what you are doing and have multiple APs and careful signal strength and channel management
I am trying to use wifi for “everything”. I know it’s bad but there is no honest to goodness way I can get ethernet to anything except the router and modem. It’s complicated. Even a 60hz ac to ethernet wall plug transceiver has to go through enough breakers and stuff it’s not worth trying.
I forgot which exact router I have but it’s basically the highest end Cisco home router that works with dd wrt. It usually costs $300 on amazon. My internet connection is dsl but I’m not trying to get higher internet speeds, just higher lan speeds.
If my low effort network setup only yields me a maximum of 7mbytes/sec I’m fine with it I just want to be able to get more than 1 meg per second on the one system that needs it the most.
You should consider upgrading to some kind of mesh system then. sure they aren’t perfect, but even a basic 3 node kit could probably increase your throughput ten fold. If you want to use DDWRT or OpnSense or whatever you can still run it separately and route internet traffic or use it for your DHCP server.
To stream a 4K bluray remux rips on your Lan you need a solid 150mbit minimum between server and player to be reliable for example. I am hardwired all the way except for mobiles, but even on Wi-Fi I can easily pull 400-500mbit real world throughput through most of the house thanks to my Wifi6 setup with multiple APs
Jellyfin is excellent. You can always just download it and run it on whatever you’re running your existing setup on and give it a try. The server’s available for a bunch of platforms.
Jellyfin is great. Worth the time and effort to get it setup. Infuse is worth the money as an AppleTv frontend too.
You will definitely need toimprove your lan speed though. I’drecommende getting off WiFi for as much of the media as you can. If not that, put in triband WiFi connection and wire them in if possible. Mesh will work, but bring your speed down.
Does it still have the issue where subtitles will go out of sync with audio?