I’ve had Nextcloud installed on Docker and it has been working for a while until now.
I had to change my server from wifi to Ethernet and gave it a new static IP. I also uninstalled docker and reinstalled it so I’d be starting fresh.
I have Nextcloud working and when I go to localhost:8070, Nextcloud works properly. When I use another device connected to the same network by wifi, it doesn’t work.
I made sure the config.php file has the server’s static IP address listed in the trusted domains category.
This used to work before but now after hours of troubleshooting, I’m all out of ideas and frustrated 😩 Any help is appreciated.
EDIT: My wife to stroll by and casually was all “did you check Windows Firewall?” and lo and behold, Windows Firewall chose today to block private connections on Docker Desktop backend -_-
Once I enabled it everything worked perfectly. Leaving this up here in case someone else stumbles upon this exact issue.
Some wireless access points / routers restrict access to Lan devices by default. You should be able to change this.
It’s also possible you have your wireless access point set up incorrectly if it isn’t your main router. Is your wifi devices on a different subnet? Is the WAP running a dhcp server? Did you plug your Lan cable into the wan port on it instead of one of switching ports?
If you can ping the server from a wifi device then it’s a server configuration issue. Is your NC instance binding to local host or the static ip? 0.0.0.0 would work too.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
Some wireless access points / routers restrict access to Lan devices by default. You should be able to change this.
It’s also possible you have your wireless access point set up incorrectly if it isn’t your main router. Is your wifi devices on a different subnet? Is the WAP running a dhcp server? Did you plug your Lan cable into the wan port on it instead of one of switching ports?
If you can ping the server from a wifi device then it’s a server configuration issue. Is your NC instance binding to local host or the static ip? 0.0.0.0 would work too.