This seems to happen quite often when programmers try to save time when writing tests, instead of writing very simple tests and allowing the duplication to accumulate before removing it. I understand how they feel: they see the pattern and want to skip the boring parts.
No worries. If you skip the boring parts, then much of the time you’ll be less bored, but sometimes this will happen. If you want to avoid this, then you’ll have to accept some boredom then refactor the tests later. Maybe never, if your pattern ends up with only two or three instances. If you want to know which path is shorter before you start, then so would I. I can sometimes guess correctly. I mostly never know, because I pick one path and stick with it, so I can never compare.
This also tends to happen when the code they’re testing has painful hardwired dependencies on expensive external resources. The “bug” in the test is a symptom of the design of the production code. Yay! You learned something! Time to roll up your sleeves and start breaking things apart… assuming that you need to change it at all. Worst case, leave a warning for the next person.
If you’d like a simple rule to follow, here’s one: no branching in your tests. If you think you want a branch, then split the tests into two or more tests, then write them individually, then maybe refactor to remove the duplication. It’s not a perfect rule, but it’ll take you far…
the code they’re testing has painful hardwired dependencies on expensive external resources
I’ve told this story elsewhere, but I had a coworker who wrote an app to remote-control a baseball-throwing machine from a PDA (running WinCE). These machines cost upwards of $50K so he only very rarely had physical access to one. He loved to write tests, which did him no good when his code fired a 125 mph knuckleball a foot over a 10-year-old kid’s head. This resulted in the only occasion in my career when I had to physically restrain a client from punching a colleague.
Wow. I love that story and I’m glad nobody was hurt.
I wonder whether that happened as a result of unexpected behavior by the pitching machine or an incorrect assumption about the pitching machine in that coworker’s tests.
I find this story compelling because it illustrates the points about managing risk and the limits of testing, but it doesn’t sound like the typical story that’s obviously hyperbole and could never happen to me.
It happened because the programmer changed the API from a call that accepted integer values between 0 and 32767 (minimum and maximum wheel speeds) to one that accepted float values between 0.0 and 1.0. A very reasonable change to make, but he quick-fixed all the compiler errors that this produced by casting the passed integer parameters all through his code to float and then clamping the values between 0.0 and 1.0. The result was that formerly low-speed parameters (like 5000 and 6000, for example, which should have produced something like a 20 mph ball with topspin) were instead cast and clamped to 1.0 - maximum speed on both throwing wheels and the aforesaid 125 mph knuckleball. He rewrote his tests to check that passed params were indeed between 0.0 and 1.0, which was pointless since all input was clamped to that range anyway. And there was no way to really test for a “dangerous” throw anyway since the machine was required to be capable of this sort of thing if that’s what the coach using it wanted.
Yikes! That’s also a great cautionary tale for Primitive Obsession/Whole Value as well as a bunch of other design principles.
I’m thinking about how I’d have done that refactoring and now I wish I had the code base to try it on. It sounds like it would make a really good real-life exercise in a workshop. “Remember folks, you have to get this right. There’s not really a way to check this with the real hardware, and if you get it wrong, someone’s going to get hurt.”
API from a call that accepted integer values between 0 and 32767 (minimum and maximum wheel speeds) to one that accepted float values between 0.0 and 1.0.
This would cause alarm bells to ring in my head for sure. If I did something like that I would make a new type that was definitely not implicitly castable to or from the old type. Definitely not a raw integer or float type.
Indeed, this is a time for naming conventions that communicate the details that the type system can’t clarify. This leads to the long names that senior programmers make fun of. Don’t listen to them; let them laugh then make this kind of mistake.
This leads to the long names that senior programmers make fun of.
Hum… The notation that I’ve seen people making fun of is one where the long names encode the exact same information that C types can handle for you and nothing else. But YMMV.
Anyway, I don’t think any naming convention can save you after somebody goes over your entire codebase converting things without care for the semantics. If you are lucky, it’s one of the lazy people that do that, and you will “only” have to revise tens of thousands of lines to fix it. If you are unlucky, the same person will helpfully adjust the names for you too.
Yes, any programmer who doesn’t care will do damage, but when I see durationInMilliseconds, I think more about what the int means than when I see merely “duration”. I don’t know how to help the people who read that and ignore it.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !programmerhumor@lemmy.ml
Post funny things about programming here! (Or just rant about your favourite programming language.)
Rules:
Posts must be relevant to programming, programmers, or computer science.
No NSFW content.
Jokes must be in good taste. No hate speech, bigotry, etc.
This seems to happen quite often when programmers try to save time when writing tests, instead of writing very simple tests and allowing the duplication to accumulate before removing it. I understand how they feel: they see the pattern and want to skip the boring parts.
No worries. If you skip the boring parts, then much of the time you’ll be less bored, but sometimes this will happen. If you want to avoid this, then you’ll have to accept some boredom then refactor the tests later. Maybe never, if your pattern ends up with only two or three instances. If you want to know which path is shorter before you start, then so would I. I can sometimes guess correctly. I mostly never know, because I pick one path and stick with it, so I can never compare.
This also tends to happen when the code they’re testing has painful hardwired dependencies on expensive external resources. The “bug” in the test is a symptom of the design of the production code. Yay! You learned something! Time to roll up your sleeves and start breaking things apart… assuming that you need to change it at all. Worst case, leave a warning for the next person.
If you’d like a simple rule to follow, here’s one: no branching in your tests. If you think you want a branch, then split the tests into two or more tests, then write them individually, then maybe refactor to remove the duplication. It’s not a perfect rule, but it’ll take you far…
I’ve told this story elsewhere, but I had a coworker who wrote an app to remote-control a baseball-throwing machine from a PDA (running WinCE). These machines cost upwards of $50K so he only very rarely had physical access to one. He loved to write tests, which did him no good when his code fired a 125 mph knuckleball a foot over a 10-year-old kid’s head. This resulted in the only occasion in my career when I had to physically restrain a client from punching a colleague.
Ah, the ol’ off-by-one-foot problem.
Wow. I love that story and I’m glad nobody was hurt.
I wonder whether that happened as a result of unexpected behavior by the pitching machine or an incorrect assumption about the pitching machine in that coworker’s tests.
I find this story compelling because it illustrates the points about managing risk and the limits of testing, but it doesn’t sound like the typical story that’s obviously hyperbole and could never happen to me.
Thank you for sharing it.
It happened because the programmer changed the API from a call that accepted integer values between 0 and 32767 (minimum and maximum wheel speeds) to one that accepted float values between 0.0 and 1.0. A very reasonable change to make, but he quick-fixed all the compiler errors that this produced by casting the passed integer parameters all through his code to float and then clamping the values between 0.0 and 1.0. The result was that formerly low-speed parameters (like 5000 and 6000, for example, which should have produced something like a 20 mph ball with topspin) were instead cast and clamped to 1.0 - maximum speed on both throwing wheels and the aforesaid 125 mph knuckleball. He rewrote his tests to check that passed params were indeed between 0.0 and 1.0, which was pointless since all input was clamped to that range anyway. And there was no way to really test for a “dangerous” throw anyway since the machine was required to be capable of this sort of thing if that’s what the coach using it wanted.
Yikes! That’s also a great cautionary tale for Primitive Obsession/Whole Value as well as a bunch of other design principles.
I’m thinking about how I’d have done that refactoring and now I wish I had the code base to try it on. It sounds like it would make a really good real-life exercise in a workshop. “Remember folks, you have to get this right. There’s not really a way to check this with the real hardware, and if you get it wrong, someone’s going to get hurt.”
Thanks again.
Well, I have a rule now which is “never test your shit on Little Leaguers” and nobody I’ve worked with has any idea what that means.
I don’t think I’ll forget.
This is true Customer empathy.
This would cause alarm bells to ring in my head for sure. If I did something like that I would make a new type that was definitely not implicitly castable to or from the old type. Definitely not a raw integer or float type.
That kind of code usually is written on a restricted dialect of C.
C is not a language that allows for that kind of safety practice even on the fully-featured version.
Even in C this is possible. Just wrap the float or whatever in a struct and all implicit conversions will be gone.
Indeed, this is a time for naming conventions that communicate the details that the type system can’t clarify. This leads to the long names that senior programmers make fun of. Don’t listen to them; let them laugh then make this kind of mistake.
Hum… The notation that I’ve seen people making fun of is one where the long names encode the exact same information that C types can handle for you and nothing else. But YMMV.
Anyway, I don’t think any naming convention can save you after somebody goes over your entire codebase converting things without care for the semantics. If you are lucky, it’s one of the lazy people that do that, and you will “only” have to revise tens of thousands of lines to fix it. If you are unlucky, the same person will helpfully adjust the names for you too.
Yes, any programmer who doesn’t care will do damage, but when I see durationInMilliseconds, I think more about what the int means than when I see merely “duration”. I don’t know how to help the people who read that and ignore it.
The story of the 125 mph knuckleball might help.