My current setup has my DHCP + DNS on my Unifi USG. However, as I have all my apps hosted on a different server (unifi, plex, home assistant, NAS, etc.) I’ve ran into issues trying to get things set up.
Basically, Unifi needs to know where the unifi server is, but it’s assigning the IP address to it.
Should I put DHCP+DNS onto it’s own system? Should I put it on my current server? And any non-Pi recommendations for systems? (I’ve had the PI filesystem clobber itself too many times)
Edit: I’m starting to think that the real problem is having UNIFI on the same system as the server, as it prevents me reconfiguring any of the server routing information without also disconnecting unifi…
Edit 2: I’m going to try switching the server from a static DHCP lease to a static IP. If that’s doesn’t work, then I think I’ll move the unifi server onto it’s own system. Thanks!
I’ve been meaning to standup another pihole on another pi for DNS redundancy. I have to research how to best keep the piholes in sync. So far I’ve found orbital-sync and gravity-sync.
For me gravity sync was too heavy and cumbersome. It always failed at copying over the gravity sqlite3 db file consistently because of my slow rpi2 and sd card, a known issue apparently.
I wrote my own script to keep the most important things for me in sync: the DHCP leases, DHCP reservations and local DNS records and CNAMES. It’s basically just rsync-ing a couple of files. As for the blocklists: I just manually keep them the same on both piholes, but that’s not a big deal because it’s mostly static information. My major concern was the pihole bringing DHCP and DNS resolution down on my network if it should fail.
Now with keepalived and my sync script that I run hourly, I can just reboot or temporarily shutdown pihole1 and then pihole2 automatically takes over DNS duties until pihole1 is back. DHCP failover still has to be done manually, but it’s just a matter of ticking the box to enable the server on pihole2, and all the leases and reservations will be carried over.
If you ever switch to AdGuard Home, adguardhome-sync is pretty good. IMO AdGuard Home is better since it has all of PiHole’s features plus it supports DNS-over-HTTPS out-of-the-box, so your ISP can’t spy on your DNS queries (non-encrypted DNS queries can be easily intercepted and modified by your ISP even if you use a third-party DNS server, since they’re unencrypted and unauthenticated)
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
I’ve been meaning to standup another pihole on another pi for DNS redundancy. I have to research how to best keep the piholes in sync. So far I’ve found orbital-sync and gravity-sync.
For me gravity sync was too heavy and cumbersome. It always failed at copying over the gravity sqlite3 db file consistently because of my slow rpi2 and sd card, a known issue apparently.
I wrote my own script to keep the most important things for me in sync: the DHCP leases, DHCP reservations and local DNS records and CNAMES. It’s basically just rsync-ing a couple of files. As for the blocklists: I just manually keep them the same on both piholes, but that’s not a big deal because it’s mostly static information. My major concern was the pihole bringing DHCP and DNS resolution down on my network if it should fail.
Now with keepalived and my sync script that I run hourly, I can just reboot or temporarily shutdown pihole1 and then pihole2 automatically takes over DNS duties until pihole1 is back. DHCP failover still has to be done manually, but it’s just a matter of ticking the box to enable the server on pihole2, and all the leases and reservations will be carried over.
deleted by creator
If you ever switch to AdGuard Home, adguardhome-sync is pretty good. IMO AdGuard Home is better since it has all of PiHole’s features plus it supports DNS-over-HTTPS out-of-the-box, so your ISP can’t spy on your DNS queries (non-encrypted DNS queries can be easily intercepted and modified by your ISP even if you use a third-party DNS server, since they’re unencrypted and unauthenticated)
You can also do that with running cloudflared or unbound on your pihole.
Sure, but that’s extra manual setup, and the point of running something like PiHole is to have a nice UI to manage things.
AdGuard Home uses DNS-over-HTTPS by default, so it’s immediately more privacy-focused than PiHole. I’m really surprised that PiHole hasn’t done this.