So I wanted to get myself a Kill-a-watt. Being who I am, I wanted information regarding its accuracy, especially at low power draws. I found a comparison with a industry grade equipment (Fluke is about the best out there in handheld electrical meters). It’s not encouraging, so I thought about a more proper meter, but it’s not easy to find an actual power meter that is accurate at low loads, isn’t a hassle to install and doesn’t cost an arm and a leg.
In terms of raw data, any properly calibrated equipment should be identical.
You could build one yourself or have a look at how to get readings from your actual electricity meter. Both can be found on the open energy monitor project page. If you self build i guess you could use a lower value CT that amplifies lower currents and just not use it at higher loads?
Mains power fluctuates a LOT though so youll definitely need averaging to some extent
Many residential tools can’t even be calibrated. Even if they are, calibration stability is a concern. The difference between a cheap instrument and a good one is short and long term repeatability.
Thanks for pointing open energy monitor, that seems overkill for what I need.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
In terms of raw data, any properly calibrated equipment should be identical.
You could build one yourself or have a look at how to get readings from your actual electricity meter. Both can be found on the open energy monitor project page. If you self build i guess you could use a lower value CT that amplifies lower currents and just not use it at higher loads?
Mains power fluctuates a LOT though so youll definitely need averaging to some extent
Many residential tools can’t even be calibrated. Even if they are, calibration stability is a concern. The difference between a cheap instrument and a good one is short and long term repeatability.
Thanks for pointing open energy monitor, that seems overkill for what I need.