Hi, you guys might know me from thesethreeposts. After reading all of the comments, I’ve decided to purchase a Mini PC to host public instances of privacy-respecting services.
I’m here to bring some good news: I got it working perfectly! You can visit reallyaweso.me today and get a list of services that I’m hosting!
All services are deployed via Docker and proxied through Cloudflare. You might ask: “Why Cloudflare?”. It’s because I can’t port forward things on my home network. It really sucks that I’m depending on Cloudflare to do the port forwarding for me, but it is what it is.
If you want me to host a specific service that you want, feel free to comment on this post!
I would really appreciate it if you guys could checkout some services that I’m hosting, as I don’t know if everything went smoothly or not. Thank you guys so much for helping me on this journey!!
I am behind CGNAT and I have been trying to set up a WireGuard mesh network to connect my local devices, such as a Raspberry Pi and Proxmox server, as well as my mobile devices, using a VPS as the central point. The goal is to expose locally running applications to the internet without relying on Cloudflare, as they do not allow video streaming and remote access to my local devices. I have looked at many tutorials on this topic, but they often left me confused due to the varying iptables rules and configurations. Some tutorials include specific device names like eth0 in the iptables rules, while others use variables like %i. Additionally, some examples have special rules for SSH access like this one. Apart from that, I am unsure about what additional steps I need to take when I want to run one of the peers as an internet gateway.
Despite the confusion, I managed to achieve the basic mesh network setup without implementing any iptables rules for PostUp/Down. Each device in the network receives an IP address within the WireGuard subnet (10.0.0.x) and can ping one another. However, I believe that the iptables rules mentioned in the tutorials would allow accessing other subnets, such as my local LAN, through the WireGuard VPN. I am still uncertain about the exact mechanism behind how these rules work in that context and how to properly configure them for my specific use case, especially considering the CGNAT situation
If you are using the exact rules mentioned in my post, only the ports of your machine will be forwarded, not your entire local network. If you want to forward ports of more than one machine, look at the github link in the sources, it contains a detailed documentation of how to achieve that. Since, I do not know a lot about iptables, I may not be the best person to guide you, in this case. However, feel free to DM me, I’ll might be able to help.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
Thanks for the nice writeup. Can you explain why you have these rules.
What happens if you remove it ?
I am not sure, actually. Look at the sources, and you’ll find the original GitHub link from where I took it. I am not very well versed with
iptables.I am behind CGNAT and I have been trying to set up a WireGuard mesh network to connect my local devices, such as a Raspberry Pi and Proxmox server, as well as my mobile devices, using a VPS as the central point. The goal is to expose locally running applications to the internet without relying on Cloudflare, as they do not allow video streaming and remote access to my local devices. I have looked at many tutorials on this topic, but they often left me confused due to the varying iptables rules and configurations. Some tutorials include specific device names like eth0 in the iptables rules, while others use variables like %i. Additionally, some examples have special rules for SSH access like this one. Apart from that, I am unsure about what additional steps I need to take when I want to run one of the peers as an internet gateway. Despite the confusion, I managed to achieve the basic mesh network setup without implementing any iptables rules for PostUp/Down. Each device in the network receives an IP address within the WireGuard subnet (10.0.0.x) and can ping one another. However, I believe that the iptables rules mentioned in the tutorials would allow accessing other subnets, such as my local LAN, through the WireGuard VPN. I am still uncertain about the exact mechanism behind how these rules work in that context and how to properly configure them for my specific use case, especially considering the CGNAT situation
If you are using the exact rules mentioned in my post, only the ports of your machine will be forwarded, not your entire local network. If you want to forward ports of more than one machine, look at the github link in the sources, it contains a detailed documentation of how to achieve that. Since, I do not know a lot about iptables, I may not be the best person to guide you, in this case. However, feel free to DM me, I’ll might be able to help.