I’m looking at getting a 10 gigabit network switch. I only have 3 devices that could use that speed right now but I do plan on upgrading things over time.
Have run hundreds of these and never had an issue. Never even had to do an RMA out of the box.
If you’re seeing packet loss on switches, you may need to pay attention to what “port speed” and total “switch fabric” speeds are these days. You can have a 10 port 1Gb switch, but the total fabric only does 6Gb.
The loss did occur on simple ping commands, only on 2 out of 5 ports. The vendor confirmed the behavior to be faulty and took the switch back.
Maybe it was just a faulty model? However I do use multicast in my network (corosync) and a lot of 10G switches seem to have problems with that, maybe this was the case here, too.
The exact model is TRENDnet 5-Port 10G Switch, 5 x 10G RJ-45-Ports and there sure seem to be quite some people having issues as well…
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
I tried a 5port 10g trendnet switch some time ago, had weird speed issues and package losses. No good experience at all :(
Have run hundreds of these and never had an issue. Never even had to do an RMA out of the box.
If you’re seeing packet loss on switches, you may need to pay attention to what “port speed” and total “switch fabric” speeds are these days. You can have a 10 port 1Gb switch, but the total fabric only does 6Gb.
The loss did occur on simple ping commands, only on 2 out of 5 ports. The vendor confirmed the behavior to be faulty and took the switch back.
Maybe it was just a faulty model? However I do use multicast in my network (corosync) and a lot of 10G switches seem to have problems with that, maybe this was the case here, too.
The exact model is TRENDnet 5-Port 10G Switch, 5 x 10G RJ-45-Ports and there sure seem to be quite some people having issues as well…