I am not looking to onboard thousands of users or host large communities, just my own and some family and close friends’ accounts. I don’t currently have a scalable homeserver setup (just a local Home Assistant instance on a Pi) and don’t have the space to put an old desktop running Proxmox on a cable.
I was browsing single-board computers and the Pine64 (2GB RAM) looks like a good deal. It seems more powerful than similarly priced Raspberry Pis (3B 1GB). Is it good for running a small Lemmy instance on?
EDIT: Thanks for the advice all, just bought an 8th gen i3 NUC (4 vCPU, 8GB RAM) to play around with Proxmox and VMs. Going to start off with migrating Home Assistant and then set up a Lemmy instance, and perhaps a static website too.
For little computers like the Pi and its clones, I’d recommend using a SATA SSD via USB rather than an SD card, unless your use case has very few writes. I’d recommend this cable: https://www.amazon.com/gp/product/B00XLAZODE/. It’s one of the ones that’s well supported by the Pi, and is what I use.
Edit: I recommended a SATA SSD rather than NVMe because you won’t really notice a major difference over USB, and some NVMe drives pull more power than the Pi’s USB ports can handle (SATA uses quite a bit less power).
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
For little computers like the Pi and its clones, I’d recommend using a SATA SSD via USB rather than an SD card, unless your use case has very few writes. I’d recommend this cable: https://www.amazon.com/gp/product/B00XLAZODE/. It’s one of the ones that’s well supported by the Pi, and is what I use.
Edit: I recommended a SATA SSD rather than NVMe because you won’t really notice a major difference over USB, and some NVMe drives pull more power than the Pi’s USB ports can handle (SATA uses quite a bit less power).
Thanks, this is what I am using now for Home Assistant, but overall it’s a bit expensive for the power you get with a Pi4.