Advanced Performance Extensions expand the entire x86 instruction set with access to more registers and adds various new features that improve general-purpose performance.
Aren’t most x86 executables being built now still favoring compatibility to performance? I think I’ve read that just targeting the current gen CPUs while compiling can bring up to 20% improvements.
For consumer software, yes, most is still being built with a baseline target instruction set from the early/mid-2000s. In 2019 there were reports of Apex Legends requiring SSE4.1, an instruction set from circa 2007. It will be be probably close to a couple decades before consumer software would start commonly requiring these instructions.
However, for more specialized environments, such as scientific and high-performance computing applications, it’s much more common that you will be using custom software designed for a specific task, and that it’s normal to recompile the software when you get a new set of hardware. In those applications, these instructions can make a huge impact, as you know exactly which capabilities are supported by the hardware and can use everything available.
I believe there are also some (possibly limited) situations where a program can check what instructions a processor supports and use either the newer (higher-performance) version or the slower, more widely-supported version depending on that check. There may be limits on how often that can be done however.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !programming@programming.dev
Welcome to the main community in programming.dev! Feel free to post anything relating to programming here!
Cross posting is strongly encouraged in the instance. If you feel your post or another person’s post makes sense in another community cross post into it.
Hope you enjoy the instance!
Rules
Rules
Follow the programming.dev instance rules
Keep content related to programming in some way
If you’re posting long videos try to add in some form of tldr for those who don’t want to watch videos
Aren’t most x86 executables being built now still favoring compatibility to performance? I think I’ve read that just targeting the current gen CPUs while compiling can bring up to 20% improvements.
For consumer software, yes, most is still being built with a baseline target instruction set from the early/mid-2000s. In 2019 there were reports of Apex Legends requiring SSE4.1, an instruction set from circa 2007. It will be be probably close to a couple decades before consumer software would start commonly requiring these instructions.
However, for more specialized environments, such as scientific and high-performance computing applications, it’s much more common that you will be using custom software designed for a specific task, and that it’s normal to recompile the software when you get a new set of hardware. In those applications, these instructions can make a huge impact, as you know exactly which capabilities are supported by the hardware and can use everything available.
I believe there are also some (possibly limited) situations where a program can check what instructions a processor supports and use either the newer (higher-performance) version or the slower, more widely-supported version depending on that check. There may be limits on how often that can be done however.
It’s not just about when it was released, sometimes budget processors or, in this case, AMD doesn’t support them straight away or ever.