I’m asking here since I assume a lot of you guys are running homelabs on Lenovo hardware.
I have two M720q Tiny that came with one 8 GB 2400MHz SoDIMM RAM each (see picture). I upgraded one to 2x 32 GB RAM and want to reuse the sticks in the other one for 16 GB in total and dual channel use. They have different FRU numbers (see picture) but I assume it’s the same marketing part number and I guess my plan works?
Can anyone confirm? I’m just unsure about dual channel since it’s not exactly the same RAM and I’m used to using exact pairs.
That’s not strictly true. A board and CPU may not support all speeds, or mixed ranks. ECC and registered RAM would also fit but not necessarily work. There’s also low-power RAM that may not be compatible. Just because it fits, it doesn’t mean it’ll work.
In OP’s case, it’s likely to be supported because it’s probably not ECC, registered, and consumer boards usually support the most common speeds. I don’t know how compatibility on low-power RAM goes.
You should not have any issues. Worst case scenario is that one is slower than the other and will cause the faster one to step down, but unless one is significantly slower, you should have no issues.
Generally, in the past 10 years at least, mixed memory on dual channel configuration has not been an issue.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
Compatible? Should be. Identical? No (at least not always). Only identical FRU are interchangeable.
Both are CL 19 do you should be fine.
Depends on if they’re the same speed. Faster memory has shorter clock cycles.
It doesn’t really matter too much though. The system should just run all the memory at the slowest speed/timings.
As long as it fits into the slot, it should work.
That’s not strictly true. A board and CPU may not support all speeds, or mixed ranks. ECC and registered RAM would also fit but not necessarily work. There’s also low-power RAM that may not be compatible. Just because it fits, it doesn’t mean it’ll work.
In OP’s case, it’s likely to be supported because it’s probably not ECC, registered, and consumer boards usually support the most common speeds. I don’t know how compatibility on low-power RAM goes.
You should not have any issues. Worst case scenario is that one is slower than the other and will cause the faster one to step down, but unless one is significantly slower, you should have no issues.
Generally, in the past 10 years at least, mixed memory on dual channel configuration has not been an issue.
On my m920q I used a random RAM stick and works fine. I would have returned it if it worked only with specific RAM sticks, even Apple didn’t do that
deleted by creator