Hey guys, i want to ask you all how you seed your torrents. I’m considering either using proxmox to create a seedbox or to build a dedicated machine with a vpn that will seedbox.
What VPN do you also use to seed? I have mullvad, for personal use but for seeding it doesn’t have port forwarding.
There is no need fire up a dedicated machine to do this. Use your router/ap running openwrt and connect a hdd via usb. The machine needs at least 128 Mb RAM (256 mb would be better). Install the transmission package, set it up, add a gig of swap space on the hdd and you are good to go. The AP runs 24/7 anyways so there will be very few extra power consumption.
Vpns often don’t allow port forwarding (mullvad has stopped support recently if I remember correctly). You can just be a passive node and not often ports, that should work good enough.
Consider seeding parts of sci-hub. it’s a project worth supporting imho.
You can just download once of the parts below with less than 12 seeds and set it to host without ratio:
an old LGA2011 xeon workstation. It is wild overkill (and not very power efficient) but it isn’t only a seedbox and it has as much PCIe expansion as I could ever want.
So… and this is probably debatable, the point of a dedicated seed box is that there are a metric-shitton of other seed boxes on the local network (at the datacenter).
I’d argue the point of self hosting is to be able to set it up however you please. It sounds like you know what to do to be safe.
I use Mulvad for general VPN duty, though I can’t personally speak to its torrent support/speed I do see many recommend it in combination with a wireguard supporting container image. Spin a few up and let us know which ones you like and why.
I will definitely document it when I reach a decision about it all. That will hopefully help lots of people too later on, but at least i’ve already decided on the client and everything is configured there so that’s half the battle. I just wonder about recommendations around here, and absolutey i would self host it all!
I am by no means an expert, but my current solution is a spare raspberry pi running a docker container with qBitTorrent+VPN that sits plugged into my router. I like to think of it as my first step towards getting my shit together to building a full ARR stack
Got so carried away I didn’t answer your actual question. Yes, good speeds but then again the sucker is hooked up to gigabit fiber. But also, my speed is usually not the bottleneck anyway, I think
Haha i actually like that you got carried away. You have a nice system :) i definitely want to have something similar. With gigabit fiber yeah you will hit whatever cap is on the pi board then and its still plenty
Definitely does the job… I have a Plex server that a lot of family and quite a few friends use. It used to be that every time someone had a request, I would walk over to my desktop, find a torrent, wait for it to finish, copy it over the LAN to my NAS running Plex, and there might be days between me remembering to fulfill their requests. Now I get a message, and immediately from my cellphone pull up the qBitTorrent web UI, paste whatever they asked into the built-in search, click add, and reply “will be in Plex in 10-15 minutes”.
Now I want a fully automated ARR stack with one of those tools that allows people to make their own requests and it have it autopirate… So instead of them sending me request messages, I will be opening my Plex to watch TV, see something I never heard of on the “recently added”, and then guess who requested that and text them “hey was that you? Thanks for the new movie/TV show, I love it”
PS.: if you’re new to this and muddling through, I am happy to send you my notes and the docker compose file. The only thing I had to do outside of that was to mount a network folder so that it was downloading straight into my server and not locally on the Pi
Its 5 devices too so with mullvad id get 10 devices… would be nice that i have another vpn that can do lots of devices maybe 50… but airvpn looks banger for torrenting :) (id need only one pc in airvpn)
Love airvpn, it unfortunately trips captchas a lot, and some sites outright block you. If you’re seeing this up on a router, make a wifi network that’s unprotected just for the sake of convenience.
But torrenting and everything critical, rocksteady.
I also use Gluetun. I consider it more or less mandatory for container–based torrent client setups. The idea is that you run your torrent client in a docker container and you run your VPN in a Gluetun docker container. Instead of opening up your torrent client ports directly for internet access, you make it a “service” of the Gluetun container. When your VPN drops connection, the Gluetun container loses connection, which means that your torrent client is also blocked. So, this setup provides a “fool proof” kill switch that prevents your torrent client from accessing the internet except through your VPN. This is as opposed to the kill switch built in to your VPN client, which tends not to be fool proof, particularly when using containers. I found this out the hard way.
Same here, I like it so far. Also has an option to sign up without using your email if you want full privacy. Also has a working Linux GUI client for your desktop
I have PIA VPN + Transmission in docker and added my nas to the container via nfs. PIA is great because of port forwarding, however you cannot choose the port, so I made a little docker container which gets the port in PIA and sets it in transmission. It also stops the container if it disconnects, but that happens rarely. Also, all traffic from transmission goes through the PIA container. If you need more info you can dm me.
TBH i don’t know anything about airvpn, but a got a good deal on pia vpn for a few years and it has port forwarding which is good for torrenting. Their servers locations are also close to me so i get good latency and speed. And that’s pretty much it.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
There is no need fire up a dedicated machine to do this. Use your router/ap running openwrt and connect a hdd via usb. The machine needs at least 128 Mb RAM (256 mb would be better). Install the transmission package, set it up, add a gig of swap space on the hdd and you are good to go. The AP runs 24/7 anyways so there will be very few extra power consumption. Vpns often don’t allow port forwarding (mullvad has stopped support recently if I remember correctly). You can just be a passive node and not often ports, that should work good enough. Consider seeding parts of sci-hub. it’s a project worth supporting imho.
You can just download once of the parts below with less than 12 seeds and set it to host without ratio:
https://phillm.net/torrent-health-frontend/stats-filtered-table.php?propname[]=seeders&comp[]=<&value[]=12&propname[]=type&comp[]===&value[]=scimag
That makes sense too. And maybe is the most logical answer. When i get my desired router i will set this up.
qBittorrent and Proton VPN has worked well for me
What do you use in terms of hardware?
an old LGA2011 xeon workstation. It is wild overkill (and not very power efficient) but it isn’t only a seedbox and it has as much PCIe expansion as I could ever want.
So… and this is probably debatable, the point of a dedicated seed box is that there are a metric-shitton of other seed boxes on the local network (at the datacenter).
I’d argue the point of self hosting is to be able to set it up however you please. It sounds like you know what to do to be safe.
I use Mulvad for general VPN duty, though I can’t personally speak to its torrent support/speed I do see many recommend it in combination with a wireguard supporting container image. Spin a few up and let us know which ones you like and why.
I will definitely document it when I reach a decision about it all. That will hopefully help lots of people too later on, but at least i’ve already decided on the client and everything is configured there so that’s half the battle. I just wonder about recommendations around here, and absolutey i would self host it all!
I am by no means an expert, but my current solution is a spare raspberry pi running a docker container with qBitTorrent+VPN that sits plugged into my router. I like to think of it as my first step towards getting my shit together to building a full ARR stack
I love that solution! Do you hit decent download and upload speeds on that?
Got so carried away I didn’t answer your actual question. Yes, good speeds but then again the sucker is hooked up to gigabit fiber. But also, my speed is usually not the bottleneck anyway, I think
Haha i actually like that you got carried away. You have a nice system :) i definitely want to have something similar. With gigabit fiber yeah you will hit whatever cap is on the pi board then and its still plenty
Definitely does the job… I have a Plex server that a lot of family and quite a few friends use. It used to be that every time someone had a request, I would walk over to my desktop, find a torrent, wait for it to finish, copy it over the LAN to my NAS running Plex, and there might be days between me remembering to fulfill their requests. Now I get a message, and immediately from my cellphone pull up the qBitTorrent web UI, paste whatever they asked into the built-in search, click add, and reply “will be in Plex in 10-15 minutes”.
Now I want a fully automated ARR stack with one of those tools that allows people to make their own requests and it have it autopirate… So instead of them sending me request messages, I will be opening my Plex to watch TV, see something I never heard of on the “recently added”, and then guess who requested that and text them “hey was that you? Thanks for the new movie/TV show, I love it”
PS.: if you’re new to this and muddling through, I am happy to send you my notes and the docker compose file. The only thing I had to do outside of that was to mount a network folder so that it was downloading straight into my server and not locally on the Pi
I’d love that. I have a raspberry pi sitting on my desk in front of me :) its not doing anything so i could try it there
I moved from mullvad to airvpn for that reason and its lovely with my *arr stack. Next level torrenting
Its 5 devices too so with mullvad id get 10 devices… would be nice that i have another vpn that can do lots of devices maybe 50… but airvpn looks banger for torrenting :) (id need only one pc in airvpn)
Love airvpn, it unfortunately trips captchas a lot, and some sites outright block you. If you’re seeing this up on a router, make a wifi network that’s unprotected just for the sake of convenience.
But torrenting and everything critical, rocksteady.
Currently using qBittorrent with Gluetun and Airvpn all in docker on my home server.
I read a bit about gluetun, why did you pick it?
Was the best option that I found :)
I also use Gluetun. I consider it more or less mandatory for container–based torrent client setups. The idea is that you run your torrent client in a docker container and you run your VPN in a Gluetun docker container. Instead of opening up your torrent client ports directly for internet access, you make it a “service” of the Gluetun container. When your VPN drops connection, the Gluetun container loses connection, which means that your torrent client is also blocked. So, this setup provides a “fool proof” kill switch that prevents your torrent client from accessing the internet except through your VPN. This is as opposed to the kill switch built in to your VPN client, which tends not to be fool proof, particularly when using containers. I found this out the hard way.
deleted by creator
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
6 acronyms in this thread; the most compressed thread commented on today has 3 acronyms.
[Thread #450 for this sub, first seen 24th Jan 2024, 07:05] [FAQ] [Full list] [Contact] [Source code]
For a VPN I picked privateinternetaccess (PIA) because it has port forwarding and I got a deal on a 5 year subscription for a one-time payment of $75.
Same here, I like it so far. Also has an option to sign up without using your email if you want full privacy. Also has a working Linux GUI client for your desktop
I have PIA VPN + Transmission in docker and added my nas to the container via nfs. PIA is great because of port forwarding, however you cannot choose the port, so I made a little docker container which gets the port in PIA and sets it in transmission. It also stops the container if it disconnects, but that happens rarely. Also, all traffic from transmission goes through the PIA container. If you need more info you can dm me.
Thanks :) why pia over say airvpn? Almost everyone here recommended Air so i am curious about your choice.
TBH i don’t know anything about airvpn, but a got a good deal on pia vpn for a few years and it has port forwarding which is good for torrenting. Their servers locations are also close to me so i get good latency and speed. And that’s pretty much it.
https://swizzin.ltd/
Thanks!! Will take a look :)