• 1 Post
  • 39 Comments
Joined 4M ago
cake
Cake day: May 17, 2024

help-circle
rss

I was able to adapt my ups to use lithium ion batteries. I bought 2 giant ones that are used for rv solar systems. I tried using the other batteries and even when sitting by idle they loose their effectiveness.


That’s not a server that’s a gaming pc. Seriously what do you want to run? I use a raspberry pi for a server and it works just fine.


This is what you want to get surround sound to work in windows again.

https://www.techpowerup.com/forums/threads/aaf-optimus-dch-audio-modded-driver-for-windows-10-11-for-all-hdaudio-enumerator-chips.292621/

This driver will work with both hdmi and toslink (optical) and possibly other connections.

Evidently Microsoft used to include a Dolby digital driver back in the day but has removed it due to licensing.

Oh and this will also enable surround sound in games too.


Htpc for YouTube and gaming and native tv app plex streaming content from my plex/nas media server (pi4). Works great. Power is crazy high in California right now at over 49c /kwh so I need to boot up the htpc as little as possible.


No doubt! I wanted to just quickly add that sometimes you can find more obscure movies through YouTube, Roku, plex or the many other free movie and tv options available. My wife and I just came upon this situation today where we couldn’t find the movie from her youth to rent or buy anywhere but lucky YouTube had it (with ads of course).


Before getting all crazy and changing the setup why don’t you try Wi-Fi. Yes Wi-Fi. Your cable might only be 100mbit and your WiFi may be faster.

Wi-Fi 5 can theoretically transmit data at speeds of up to 3.5 Gbps. And obviously WiFi 6 and 7 are even faster.


Why don’t you just buy and rip the (dvd, blueray, etc.) and then donate or give away the physical copy to someone?

I am like you in that I don’t care to have the box a movie comes in and everything I buy gets ripped and then given away to my neighbors or friends.


Does this happen on iOS too? I listen to podcasts every night for an hour and never hear any ads except for the ones encoded with the file, ie sponsor ads.


Lidarr already has a lists import feature specifically with Spotify integration. The choices are: “Spotify followed artists,” “Spotify playlists,” “Spotify saved albums.”


About 9tb. 100 days worth of music, 300 or so shows and over 1000 movies. Just recently started to get /convert everything to 1080p.


This sounds awesome but not sure it would apply to my use case. Maybe you could elaborate.

What I want is to have 1 pc be a host for all the tvs in my house (4, master bedroom, guest room, office, and living room) each room has a video output and a usb cable with a hub that has keyboard and mouse and maybe a controller for games.

So far what I have is all the displays are mirrored and the keyboard and mice and joysticks work in each room but all the displays show the same thing.

It would be rad if each one was a vm and had its own front ends so you could watch plex in one room while someone plays Dave the diver in another.


lol. What? You have a link to article or some proof of a video file as an attack vector for a hacker? Video files aren’t executable and even if there was a way to cause some type of malware to be ran from it the file it would have to be coded explicitly for the video player/system running it.

My guess that if this was a legit attack vector that all the latest movies and big popular tv shows would be targeted and we would hear a lot of stories about it.

You’re on Linux which gives you a huge leg up on not being target by a virus. Just chill and watch your movie.


Yeah totally agree with you on the smart speaker and camera bit. My google home mini resides in an upper cabinet in the kitchen. You have to yell in its direction to get it to hear you. We mostly just use it to add items to our shopping list. It also connects to a Bluetooth speaker system (that doesn’t have a mic) to play music through.

The cameras I’m getting are just for the outside of my house and I’m planning on getting the (rtp?) feed off of them and self hosting.


I don’t use them but I work for a dj that uses them to backup all their music and production music. This has been going on for over 10 years now and they are still using them. At one point I was over there while they were downloading a large batch of their files and the speed was fast enough to saturate his internet.


Wow thanks. I’ll look into it. I bought a 4 pack of smart plugs for $25 and figured there had to be a catch. But 4 years later they are still working fine. Nothing I use them for is mission critical or high amperage but I’m happy.

I also have 4 levitation smart switches which I’m not as worried about them but still keep them on the vlan.

Besides those I have a cheap smart ir transmitter, and a google nest smart speaker. About to add 2 WiFi cameras to the vlan, so we will have to see how the performance works out.


I honestly think you would be more happy with any hackable (openwrt compatible) router over the pi. The pi is great for many things but for a router is really lacking.


I don’t think I am special but I have a few vlans setup. May main concern is using cheap “smart” devices from china and isolating anything they see or do to their own private network.

I also have a vlan setup for my guest network because I let my neighbors use it and wouldn’t want them exploring my nas.


Hey looking back through my setup I realized I have something a little different. I have my htpc with hdmi going to my tv and then toslink (optical) audio feeding my surround sound.

It looks like to get my setup work had to install a custom audio driver. It’s called “aaf Optimus” which allows me to select Dolby digital as an option under “default format” in the audio properties menu.

Not sure this applies to you as my setup is kind of convoluted. Anyways when I watch YouTube the sound is just plain 2 channel audio and when I play something from Netflix it does pass through surround. Games are also in surround sound.

Just wanted to double check everything and give you a heads up. Good luck.


There are 2 versions of plex. One is just called plex and you can use your mouse. The other is called plexHTPC and it uses arrow keys and spacebar to select content. It took me a while to figure out that there are 2 different versions out there. The htpc one does ac3 pass through just fine.


Yeah basically. The point is you will never be able to make a real clean room in your home. This gets you 90% of the way there for a tiny bit of time and only takes a few minutes to get going.


Do it! Yeah start with the mother board and see what happens and then open the fucker up and replace the try to move the platters to working drive. You don’t have anything to lose so why not. For a quick and dirty clean room run the shower really hot for a few minutes to make a bunch of steam and then wait for the humidity to naturally equalize, boom you got a few minutes to do your swap job.


Should be fine. Think of all the usb storage devices like senate and western digital. They all operate with a very similar adapter. The firmware on the drive should mark bad sectors not the interface that connects it.


I bet this is ops issue. Either the vpn auto selected the fastest server (probably in Italy) of op defaulted to a local server. Op should change server to a country with more lax rules (Netherlands?).


1080p is way better if you have a screen that is a good size. Also if you are into surround sound (I am) there is a lower chance to get it on 720p rips.


Put the nas and router where the internet comes in at and the just use WiFi for your office and the rest of the house. Thats what 99% of the people do. All the new WiFi routers are really efficient at beam forming and other technologies to get you a decent signal.

At my house, since it is raised up I was able to crawl under and run Ethernet to the living room for the htpc(gaming) computer and it was pretty easy to install a keystone next to a power outlet. Not sure if that is viable in your situation.

But even then I didn’t bother running Ethernet to all the rooms because even streaming 4k video is viable over WiFi. Though I understand it might not work so well if trying to edit on a nas or something similar.


If that’s the case you can share a drive or folder on windows using smb. And then on iOS you can connect to that share with the files app. I use this all the time with my nas.


Forgive me, but isn’t sharing files between pc and an iPhone and remotely accessing a windows computer, two totally different things?

To share files between iPhone and pc you just plug in a usb cable and or use iTunes.

To remotely access a pc there are web services like gotomypc.com (among others) and software services like vnc (among others).


I use 2 of these 5tb ones for my nas and have been very reliable. https://www.seagate.com/products/external-hard-drives/portable-drive/

I have a few more that I was using for games and am happy. It’s not ideal but it is what works for me.


If your power is expensive then go with raspi/nas/mini pc/laptop route. My setup is raspi with 2 usb drives. Going on 5 years now with no problems. They only store media and I don’t care about backing them up.


Don’t worry about the speed. The important thing is that you are giving back. Seed to at least 150% or forever if you can. Your upload speed is usually lower than your download speed from your isp.


I have this currently. Been running steady for 5 years now. I have 2 5tb portable hdds as my storage (usb3) and all the arrs, plex media server and qbittorrent with the vpn and a kill switch so if the vpn goes down the torrents aren’t running. Everything just works as long as nothing needs transcoded. My main tv is Roku and seems to handle all the file formats so it been working fine for me. YMMV.

Currently I am trying to learn docker and containerize all the different apps to make redeployment simpler.


Is dockStarter a waste of time?
Should I be learning docker compose instead of relying on dockStarter to manage my containers? I got portainer up, should I just use that to manage my stack? I’m committed this summer to finally learning docker. I’m on day 3 and the last puzzle piece is being able to access qbittorrent locally while running the container through the vpn.
fedilink

I want to 2nd this. Lots of manual work because software (and you) can tag albums, folders, files incorrectly and have a mess on your hands.

I like software like “tagscanner” and even iTunes. Once the files have proper metadata then I use that data to rename the file/folder names.


See if any of them support ddwrt openwrt tomato router or just Linux in general. You probably couldn’t run plex media server, but you can do ad blocking, vpn server, and basic nas. Works great for these tasks.


This is good advice right here. Unless you’re a dj (even then it’s overkill) and or have incredibly high end equipment (again, it’s probably overkill), just go with some high bitrate mp3. MP3 is incredibly compact, everything plays it, and has all the metadata needed. Seriously you can’t tell the difference.


Well it depends on how much you pay for power and what your pc consumes at idle (or at least idling while doing networking). I’d do an analysis and a graph with excel to make sure. Many old (used) networking components can be had for a steal and will still have many years of use still left in them. Use a kill-a-watt to get an accurate account of idle pc power.


Yes I’ve done it. What sucks is you make a lot of trash this way. Also double and triple check that the drives you buy will have standard sata connectors on them.


They said they were bumping up to the ram limit on their 2gb pi. I suggested getting a pi with 4 or 8 gb of ram.


Commenting to bring awareness to the ‘arrs. Radarr sonarr and lidarr will get you all the media you need organized perfectly. It runs on any device but take a few days to figure out. Once setup it’s a set it and forget it thing. Uses torrents and or usent so use a vpn. Mine runs on a 10 year old raspberry pi 2 and a few usb hdds. Been going strong with very little maintenance for 6 years at this point.


And that’s the problem right there. That’s 12w idle power. The computer is not going to idle all the time and power consumption will rise. If you are like me and live in a place with high cost of power this will add up. The raspberry pi will is at max 9w of power. That’s max. At idle it’s more likely to be around 3 but could be more if you have some usb drives plugged into it.

Maybe consider selling your pi2g and buying a pi4g or 8g.