A genuine depiction of “Plague Sapiens”: a distinct form of human evolution, entirely erased from memory until it resurfaced from the infernal depths of space.

  • Fueled by artificial intelligence
  • 0 Posts
  • 38 Comments
Joined 1Y ago
cake
Cake day: Nov 09, 2023

help-circle
rss

No problem, indeed I like unreasonable curiosity a lot xD


Federated instances could be counted. Non-federated like govermental or company ones can’t. So yeah, I would say 3.



Ah, yeah stutters has different meanings. One being people with a speech disorder and the other one is usually used for display issues (like tearing). It felt like I was using a low refresh rate screen with really low fps, but had 144Hz and 144 fps xD

USB can ramp up latency for sure, should be because of I/O overhead, which usually is ignorable when the HW is fast enough ime.

Now my fingers are itchy to try FreeBSD and OPNsense again, haha. Like I haven’t already enough stuff to do and test…


What? xD The script used the DSL modems IPv6 WAN IP to set up the IPv6-to-IPv4 tunnel (to get IPv4 working) each time my ISP dropped the connection after 24h (standard DSL procedure over here in DE) or rnd reconnection. But somehow that script triggered a higher latency and probably packet loss/delay (couldn’t measure it, cause it only appeared in fast paced shooters like MW2019). Without the script everything ran fine except IPv4 after disconnections, which had to be setup manually. After that I sent the DSL modem back and returned to my AVM FritzBox as my main router. Can’t really say if it was directly the scripts fault or sth else in my OPNsense setup (low powered CPU, USB ethernet adapter, 4 port gbit LAN PCIe card, defective RAM, …). Maybe I’ll try a similar setup again some time, because I kinda liked OPNsense…


Your answer wasn’t rude at all :) and thanks for the long one! Looks like I should try FreeBSD again, last time I was just overwhelmed, but that’s many years ago. My last try was OPNsense which didn’t work like I wanted it to (stupid IPv6-to-IPv4 tunnel, which didn’t properly reconnect after the 24h ISP disconnection and my script to fix this fucked up latency and gaming wasn’t possible because of stutters (probably packet loss too)). Security is the main aspect of my try to use it. Linux can be like a swiss cheese if misconfigured. Still better than Windows (Server) tho xD


Yeah you’re right. Sandboxed gplay services can still be used to surveil clients, good thing you can use another profile with gplay services and install apps (which needs those) on there, meaning no potential leaks for apps that use their own push notification service and closed APIs (Google or Firebase). Good thread about it: https://discuss.grapheneos.org/d/9407-this-is-why-i-use-grapheneos


More open source hardware would be epic, but imo this trend will take years to grow if it even will succeed. Most people just don’t care about their privacy at all and with hw and sw being open, there’s less money to be earned because of easier plagiarism.


For a small pocket and low power consumption but incredible performance I would recommend the Odroid M1. Add a cheap nvme drive for the os (I prefer debian) and a 2,5" hdd. On top of debian you can install OMV for a webui based linux home server control. DietPi is nice for beginners too. And like other ppl already said, you can use docker/podman for running your software.

Oh and don’t forget the 3-2-1 backup rule. 3 Backups, 2 different media types (ssd, hdd, usb stick, cloud, …) and 1 offsite backup (cloud or hdd at your friend’s house).


Tried to help :P What’s your take on using freebsd instead of linux? More security?


Every app is sandboxed by default and has no permissions, which you can give them. Like StorageScope for accessing only certain files.



That’s why everyone should use GrapheneOS. Sandboxed GooglePlay services can be used, if needed. I personally use 3 proprietary apps, one of them is WhatsApp Business (self-employed and for stupid dipshits that won’t use anything else…), which is more privacy-friendly than the personal client itself. Join the resistance! Use GrapheneOS :)

Good read about push notifications on GOS: https://discuss.grapheneos.org/d/9407-this-is-why-i-use-grapheneos



Like someone already mentioned, you can use dracut-ssh for rpm-based distros or dropbear-initramfs for deb-based distros. My idea would be to use debian as host and virtualize or dockerize the freebsd system/software part.


Have you tried jDownloader? If normal link search doesn’t work, try the deep search (or get into the websites source code and search for the media file and input that into jDownloader).


It’s huge for networking. VPN gateway (for accessing the VPN WAN over LAN) on the host is 20-40% faster than dockerized…


Even switching versions is super convenient now.





Whats your setup? Stuff dockerized? Looks like routing/iptables are set incorrectly (depending on your setup).

But my solution would be using a local DNS VPN like personalDNSfilter, exposing your services over the VPS to the net and connecting over https to them. For local access at home you can use split-brain-dns (hope thats the correct word [example.net = 8.8.8.8, at home it resolutes to 192.168.x.y]). With that you can just walk around and use every service with the best latency and bandwidth, without manually deactivating the VPN.


I installed all fonts manually and with the autoinstaller b.net, eaplay, epic store and ubisoft connect and their dependencies as well.

If not sure, or steamdb info isn’t enough. Just install everything… Not the best solution, I know, but better than install one, test and repeat…

Usually all vcredis and .net are OK to install.


All depenfencies installed? What wine version is used? I prefer the newest Wine-Ge, but some games only work with 7.


Just containerize/virtualize the shit and no split tunnel needed. Custom routes and fw rules can help too…


Exactly the same in many parts of DE. In Bavaria we have cable (docsis 3+) from Vodafone and then there’s copper and fibre from Telekom (most other ISPs use their infrastructure). Depending on where you are in Germany, cables is provided by another company. There are some fibre companies too.

I’m currently moving from Nuremburg to a smaller town next to it. Currently I have 250/50Mbit/s and in the street I’m moving I can only utilize 100/40… Like wtf, 100m down the road there’s the citiy hall, they have fibre and it’s street to the next small city will get fibre next year. I won’t until idk years. C’mon I would pay a shitton to get synchronous 1 Gbit/s. I’m gonna test 5G there too and maybe for my high bandwidth stuff that’s an option. Still fucked up. It’s 2023 an we still live in the stoneage of the internet. Fuck our politicians…


Netcup is my favourite hoster in the EU, but I live in DE. 2€/m for 2c, 2/4gb ram, lots of traffic. They have coupons from time to time or xmas/easter/… deals. The whole front- and backend works like a charm too. Upload your own isos/qcow images, download backups, KVM is awesomely implemented too. Sadly they don’t take crypto and you need a call verification or id via mail for your first purchase (understandable as a german hoster), besides that just wonderful :)


Thanks for the tip. Haven’t used tailscale (or sth similar) yet. But I’ll take a look into it :)


That’s why I have abandoned private trackers. I only use public ones with a seed ratio of 2, because I like giving back. Everything else is downloaded with Real-Debrid and jDownloader2 (mostly OCHs or sometimes torrents, when there aren’t much/any seeders and the speed is unacceptably slow).


Buy a cheap VPS, setup a Wireguard or OpenVPN server (wg-easy is quite nice). Then something like Nginx Proxy Manager or plain nginx and expose your services over that.

Edit: if you need help, hit me up, love sharing my knowledge


I think there’s lot less potential abuse, if you control your tracker and the peers. If I remember correctly, you usually have to seed till a specific ratio is reached. I doubt that any copyright-infringment-abuse-company tries to get acces to those trackers, if they have to upload stuff at first.


Why not use sth that is based on OpenWeather? Weather from FDroid comes to my mind. For Windows idk. You can find some Gnome Extensions for Gnome (Linux DE) which can use OpenWeather too.



That and permissions are likely the main problem, dependencies are likely the next xD


Some years ago, being a linux noob, I have created a VM to setup aBitcoin Lightning node. The blockchain is huge and my idea was to passthrough a 2 TB (/dev/sdc). Had to restart my homeserver because of some hoste settings I’ve changed. Didn’t see that sdc changed to sda and sdb (8TB fully encrpyted drive with my smb shares on it(seperate VM) to sdc. So far no problem. Because I didnt’t knew that the device names changed, I started the initilization process which formats the passthrouged HDD. Oh boy, when I heared the 8TB HDD spin up and doing it’s thing, the 2 TB HDD was still in spin-down, I panicked and shut down the server. End of story, 8 TB data was unrecoverable (lost all of my photos since I was a kid (~100k), lots of redownloadable stuff, gladly everything sensitive was backuped, like private seeds, work stuff, docuements, …) Never use /dev/sdX device paths, use UUIDs. They exist for a reason.


Freaking slow, exactly like Tor imo. The last torified torrenting test was many years ago. Speeds were at 100kb/s. Nope. With double VPN I’m at ~150 Mbit/s during torrent downloading.

And time is more expensive than anything else :)


NordVPN being trash xD Not only because of that. Complying with the law is a ok. I just hate their whole vpn and security propaganda. Like, you will be hacked without us… And they have been hacked, if I remember correctly it was twice…

There are better commercial VPN providers.

Sadly ovpn.to went down some time ago. Cheap, secure and Mr. Nice was really nice and helpful. He probably died -.-


VPN and you are fine lol. Sometimes you have to pay even for illegal stuff… Nothing’s free…