Running a Debian VM with Docker solved all those issues for me. I set the arrs root /data folder on my NAS to mount with CIFS at boot. It works so well with a ceiling of 4/8 cores and 12GB RAM I’ve moved all my containers to it and mostly just use Proxmox for monitoring and reliable backups/images over NFS.
The only issue I’ve had in the last year or so took me about 30 minutes between realizing something was wrong and fixing it: Make sure you put your CIFS credentials file in a folder accessible to Debian’s main user account or a power loss will break automount until you re-establish the link with a root user. Or create a locked down arrs-only user on your NAS so the CIFS command can include the username and password with less concern.
I have a very similar setup. Jellyfin in Docker on a Debian VM (2 cores, 8GB RAM), and all the media on the NAS. The CIFS/SMB from the NAS is mounted in fstab. I keep all the metadata locally for speed - ie not on the NAS. I don’t like the extra layer of running Docker, but it works like a charm whereas I had a few hassles running Jellyfin natively in the VM. I do have a special ‘media’ user with the name and password in the mount command which only has permissions for the media.
Can’t comment on the arrs suite since I get all my linux distros on those disks attached to the front of magazines.
I run a couple of instances of Plex in Proxmox containers. I use containers so I can share the GPU/Network across more than one CT. I think if you use a VM it can only pass through the GPU to one
I’m using Open Media Server on a PC. Docker for Plex and a DAS for data storage. It isn’t simple but it’s not hard and it’s been stable and easy to use after you figure out setup and get used to where things are in menus. It’s basically a nas with docker albeit a little slower because it’s USB storage.
I run a Plex container on Proxmox and have it connect to my Armbian/OMV NAS via SMB. The way I got SMB shares working was to mount them from the Proxmox host and then mount them read-only from the container. (better security ig) I’d be happy to share my configs although it might take me a couple days to pull them up.
Another alternative I’ve been thinking about is buying an external drive rack and attaching it to the outside of my server’s PC case. Then running SATA extenders but this might not be possible depending on the kind of mini PC and I’ve heard extending power can get dicey if you have more than a few drives.
I run almost exactly the same thing. Plex running in Proxmox VM with a GPU passthrough, and an OMV instance in Proxmox VM hosting all the data shares. Proxmox also hosts multiple Docker stacks for various instances. This is spread out over multiple bare metal boxes.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
Reduce the need to transcode.
I run jellyfin on my NAS and the arr stack on a separate PC. I then manually sftp things over like and animal. My PC is running bodhi.
Why not use samba or something to map the NAS as a remote drive and have the arrs use it as their destinstion folder?
I was having an issue getting nfs working and it just left a bad taste for me. I think your right I should just mout it and be done.
Get a better cooler?
Running a Debian VM with Docker solved all those issues for me. I set the arrs root /data folder on my NAS to mount with CIFS at boot. It works so well with a ceiling of 4/8 cores and 12GB RAM I’ve moved all my containers to it and mostly just use Proxmox for monitoring and reliable backups/images over NFS.
The only issue I’ve had in the last year or so took me about 30 minutes between realizing something was wrong and fixing it: Make sure you put your CIFS credentials file in a folder accessible to Debian’s main user account or a power loss will break automount until you re-establish the link with a root user. Or create a locked down arrs-only user on your NAS so the CIFS command can include the username and password with less concern.
I have a very similar setup. Jellyfin in Docker on a Debian VM (2 cores, 8GB RAM), and all the media on the NAS. The CIFS/SMB from the NAS is mounted in fstab. I keep all the metadata locally for speed - ie not on the NAS. I don’t like the extra layer of running Docker, but it works like a charm whereas I had a few hassles running Jellyfin natively in the VM. I do have a special ‘media’ user with the name and password in the mount command which only has permissions for the media.
Can’t comment on the arrs suite since I get all my linux distros on those disks attached to the front of magazines.
I run a couple of instances of Plex in Proxmox containers. I use containers so I can share the GPU/Network across more than one CT. I think if you use a VM it can only pass through the GPU to one
I’m using Open Media Server on a PC. Docker for Plex and a DAS for data storage. It isn’t simple but it’s not hard and it’s been stable and easy to use after you figure out setup and get used to where things are in menus. It’s basically a nas with docker albeit a little slower because it’s USB storage.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
3 acronyms in this thread; the most compressed thread commented on today has 7 acronyms.
[Thread #235 for this sub, first seen 24th Oct 2023, 03:55] [FAQ] [Full list] [Contact] [Source code]
I run a Plex container on Proxmox and have it connect to my Armbian/OMV NAS via SMB. The way I got SMB shares working was to mount them from the Proxmox host and then mount them read-only from the container. (better security ig) I’d be happy to share my configs although it might take me a couple days to pull them up.
Another alternative I’ve been thinking about is buying an external drive rack and attaching it to the outside of my server’s PC case. Then running SATA extenders but this might not be possible depending on the kind of mini PC and I’ve heard extending power can get dicey if you have more than a few drives.
I run almost exactly the same thing. Plex running in Proxmox VM with a GPU passthrough, and an OMV instance in Proxmox VM hosting all the data shares. Proxmox also hosts multiple Docker stacks for various instances. This is spread out over multiple bare metal boxes.