Hi friends. I’m a newbie in self-hosting, though I’ve been managing (virtual) linux servers at work for a couple of years. I’m completely ignorant on the hardware choices out there, hopefully you can point me to the right direction.

Here are my requisites:

  • Low power consumption, I plan to have it connected 24/7 and I’m kinda concerned on how much it will impact the electricity bill
  • Ethernet port, preferably gigabit but whatever
  • Graphical performance is not important as I don’t plan to connect it to any display. As long as I can ssh into it, I’m good.

Services I plan on installing, for starters:

  • casaOS
  • pi-hole, or equivalent
  • Home Assistant
  • Kitchen Owl (nice to have)
  • Paperless-ngx (nice to have)

I live in europe and my budget is around 80 euros or so. Thanks in advance!

alien
link
fedilink
310M

@pathief I think what you are looking for is intel n100 since it only uses like 6-watt TDP, but before jumping to that, you should look at Heaven video. If you only want to run for a year or two, maybe the older CPU is much better.

https://www.youtube.com/watch?v=PisIPpbMkTc

I hope you found what you are looking for.

@krash@lemmy.ml
link
fedilink
English
1
edit-2
10M

This. I did extensive research and will get myself a n100 or n200 for my on-prem server. Itcaps out at 16 GB ram, but I’ll survive. N305 has 3x the power consumption as n200 at around 15W. Asrock even has a mITX mobo for the n100. And its fanless!

RPI5 would be the other obvious choice, but it’s impossible to get a hold of.

Edit: Also, check out this thread: https://discuss.tchncs.de/comment/2340730

@PipedLinkBot@feddit.rocks
bot account
link
fedilink
English
110M

Here is an alternative Piped link(s):

https://www.piped.video/watch?v=PisIPpbMkTc

Piped is a privacy-respecting open-source alternative frontend to YouTube.

I’m open-source; check me out at GitHub.

Footnote2669
link
fedilink
English
810M

I have an Intel NUC I got on eBay for £50. It’s running 30 containers, 10W draw

Lemmy Tagginator
bot account
link
fedilink
-210M

deleted by creator

Kalcifer
link
fedilink
English
310M

HP EliteDesk 800 G3 Mini (or equivalent)? You can get them for pretty cheap on eBay.

Lemmy Tagginator
bot account
link
fedilink
-410M

deleted by creator

Lemmy Tagginator
bot account
link
fedilink
-310M

deleted by creator

@PerogiBoi@lemmy.ca
link
fedilink
English
210M

A used Android pixel phone. You can root it and install Pideploy and run PiHole through it.

I have an old Pixel 3a doing exactly this. The other services I don’t quite know if they have an Android implementation.

Doesn’t suit your every use case, but I figured I’d share.

termux-root has a docker package. That still doesn’t cover everything but a lot of popular services have docker images

@PerogiBoi@lemmy.ca
link
fedilink
English
110M

Ooo learn something new every day. I’m going to have to try this out later. Thanks!

@pathief@lemmy.world maybe an old raspberry pi would work for you?

@pathief@lemmy.world like raspberry pi 3 in particular

Presi300
link
fedilink
English
210M

My whole “homelab” is made of either things I literally found in the trash, hand-me downs and 2nd part stuff I got for extremely cheap. It’s no speed deamon, but it’s got 8cores, 16GB ram and gigabit… What I’m trying to say is, that is most likely also an option for you and there is no reason to buy the latest and greatest of hardware for running simple things like pi-hole. As for the electricity bill, unless you’re running something computationally intensive 24/7 or just a ton of hard drives, I wouldn’t worry about it.

A cheap android box + armbianOs is also an option if you’re looking for low power. I have a 7watt one that’s running 24/7 for the last few years.

@Decronym@lemmy.decronym.xyz
bot account
link
fedilink
English
1
edit-2
10M

Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:

Fewer Letters More Letters
DNS Domain Name Service/System
NUC Next Unit of Computing brand of Intel small computers
PSU Power Supply Unit
PiHole Network-wide ad-blocker (DNS sinkhole)
RPi Raspberry Pi brand of SBC
SBC Single-Board Computer
SSD Solid State Drive mass storage

7 acronyms in this thread; the most compressed thread commented on today has 5 acronyms.

[Thread #367 for this sub, first seen 21st Dec 2023, 14:45] [FAQ] [Full list] [Contact] [Source code]

This serves a couple services, incl. kitchenowl and paperless-ngx very fine for me.
Once, I got it for around 45€.

@BearOfaTime@lemm.ee
link
fedilink
English
12
edit-2
10M

As a point of reference regarding power consumption:

I’ve been running a desktop non-stop for the last ten years (built as a gaming rig) as a file/media server, so it’s probably the worst thing you can run this way, power-wise. Has an 800 watt power supply, running windows.

I’ve done the math many times, costs me about $1/day in power at mostly idle.

Just presenting a worst-case example as a guideline.

I’ve recently spun up a Raspberry Pi Zero W for PiHole, DHCP, DNS, Tailscale, Joplin and Bitwarden. It’s maximum power draw is TWO WATTS. Haha

Currently running a watt meter on the desktop, should have some decent actual numbers from it soon, but can’t imagine idle is any less than 50 watts.

So there’s two extremes. Don’t be me (looks like you aren’t!)

Edit: I wouldn’t recommend the Zero W for this, it’s underpowered. I’m already overloading it with just PiHole and Tailscale, honestly.

Scrubbles
link
fedilink
English
410M

Yeah same. I have several machines that whirrr all the time. The power cost and usage is fairly negligible. The real costs in the house are appliances. OP will save more energy by getting a more power efficient fridge or dishwasher than worry about a computer being on in the closet

@Crispy_Mate@lemmy.world
link
fedilink
English
110M

Pi Zero could be underpowered but the bigger pi’s sound like a perfect match. I would recommend looking into a used pi 3 or 4, because the pi 5 is new and always out of stock (at least in europe) so you pay around 150$.

Libre Computer “Le Potatoe” is a inexpensive solid performing SBC.

@dogma11@lemmy.world
link
fedilink
English
410M

Throwing in my own data, I have a small server rack at home that runs a brocade icx4630 switch and dell r720, idles around 250w. My desktop setup, monitors, amp, computer itself etc idles around 200w.

@BearOfaTime@lemm.ee
link
fedilink
English
410M

Oof. Maybe my power is worse than I thought!

@rambos@lemmy.world
link
fedilink
English
310M

Adding my data as well:

My server is diy desktop pc - mbo MSI Z270-A PRO with celeron G3930 and 16GB RAM, 3x SSD on 550W PSU, idles at 23W. After adding another 3.5" HDD consuption went up to 34W. 34W in Ctoatia is around 34€ a year.

Some SFF PCs are at 10-15W. SBCs like rpi should be below 10 W, but dont think you can get anything new for 80€

@roofuskit@lemmy.world
link
fedilink
English
210M

A refurbished elite desk sff PC works great.

Just got one for $100 on r/hardwareswap (yes I still visit reddit, but I can’t give up hardwareswap) a couple weeks ago

@roofuskit@lemmy.world
link
fedilink
English
110M

You can get them on eBay and Amazon for that much.

Create a post

A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.

Rules:

  1. Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.

  2. No spam posting.

  3. Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.

  4. Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.

  5. Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).

  6. No trolling.

Resources:

Any issues on the community? Report it using the report flag.

Questions? DM the mods!

  • 1 user online
  • 126 users / day
  • 421 users / week
  • 1.16K users / month
  • 3.85K users / 6 months
  • 1 subscriber
  • 3.68K Posts
  • 74.2K Comments
  • Modlog