Do you guys have any suggestions for a 1gig ethernet modem that openwrt or ddwrt supports?
Edit: Apparently the device that im looking for is called an access point not a modem
Maybe check out the Asus TUF-ax4200 gaming modem/router?
Just bought one and it’s been an awesome upgrade to my old AC modem/router. Wifi6/AX, 4 core, good ram, 1x 2.5GbE WAN and 4x1GbE LAN. Has USB to take a mobile SIM for dual WAN/failover. ASUSs software is very good, but it is on the support list for openwrt once Asus stop supporting it.
Meets definition of a modem/router depending on what physical connection and protocols your ISP provides.
My Ethernet WAN connects to the ISPs NTU (optical fibre network termination unit), but WAN is capable of negotiating PPPoE, PPTP or L2TP with PAP/CHAP. Can also Dual WAN, Port forward, NAT.
The documentation is a little lacking. And no ADSL/VDSL etc. but it meets reqs for some.
Although that’s probably what op is actually asking for, I don’t think it’s a modem. It’s a router with an access point.
It does have SFP for a fibre connection and pcie and USB for you to potentially add a modem or whatever else you want.
I’m guessing OP is just looking for a wifi router? Otherwise we’d need to know what kind of modem they’re looking for, like Cellular? VDSL? HFC? Satellite? It depends on the internet connection. Different parts of the world need very different kit.
A modem is a sort of “adapter” between physical mediums and protocols and sometimes also a router. It speaks DSL, fibre, cable etc. on one end and Ethernet on the other.
A wireless access point is similar in that is also is an “adapter” between mediums but it’s an adapter between physical and wireless. It effectively connects wireless devices to your physical Ethernet network (allowing communication in both directions) and never does any routing.
What you are typically provided by an ISP is an all-in one box that contains modem, router, switch, firewall, wireless access point, DHCP server, DNS resolver and more things in one device. For a home network, I wouldn’t want most of these to be separate devices either but at least wireless should be separate because the point of connection for the modem is likely not the location where you need the WiFi signal the most.
If your ISP comes via Fixed wireless, PPPoE or fiber, I would suggest getting something like this, and setting it up accordingly with PFSense or OPNSense.
I would start by seeing if your ISP has a list of supported models. Pretty sure satellite must use the provider’s modem. Cable service is often picky, if that’s what you have. DSL less so. (And I assume you’re not on dialup.)
Fixed wireless, PPPoE, and fiber should all be giving you an Ethernet handoff so you shouldn’t need a modem for those. And if somehow you still have a T1 line, god help you.
In the US you usually need to use your ISP’s modem. Even if you buy the modem, it needs to be one that the ISP supports and the ISP will have more control of the device than you do. Even if it were running openwrt or ddwrt, you would not have access to use it.
I have an Arris modem and it works fine now, but for months there was a bug where it would randomly crash. I don’t know when the bug was fixed, but firmware updates are controlled by the ISP so I had to just reboot it when it would crash. In other words, even if you have good modem hardware, whether it works correctly is up to your ISP.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
What do you mean when you say modem? Are we talking DSL, fiber or Ethernet?
Maybe check out the Asus TUF-ax4200 gaming modem/router? Just bought one and it’s been an awesome upgrade to my old AC modem/router. Wifi6/AX, 4 core, good ram, 1x 2.5GbE WAN and 4x1GbE LAN. Has USB to take a mobile SIM for dual WAN/failover. ASUSs software is very good, but it is on the support list for openwrt once Asus stop supporting it.
Asus TUF-AX4200 is a router/AP, not a modem/router.
Meets definition of a modem/router depending on what physical connection and protocols your ISP provides.
My Ethernet WAN connects to the ISPs NTU (optical fibre network termination unit), but WAN is capable of negotiating PPPoE, PPTP or L2TP with PAP/CHAP. Can also Dual WAN, Port forward, NAT.
The documentation is a little lacking. And no ADSL/VDSL etc. but it meets reqs for some.
Turris Omnia. Powerful hardware, auto updates, config backup / restore (with anti-bricking feature), SIM slot, etc
That looks like a router not a modem
That’s pretty cool!
Although that’s probably what op is actually asking for, I don’t think it’s a modem. It’s a router with an access point.
It does have SFP for a fibre connection and pcie and USB for you to potentially add a modem or whatever else you want.
I’m guessing OP is just looking for a wifi router? Otherwise we’d need to know what kind of modem they’re looking for, like Cellular? VDSL? HFC? Satellite? It depends on the internet connection. Different parts of the world need very different kit.
Modem for what type of internet connection?
My ISP provides fiber connection. I want a device that can provide 2.4Ghz and 5Ghz WiFi and 1Gig ethernet.
You’re looking for a wireless access point then, not a modem.
whats the difference?
A modem is a sort of “adapter” between physical mediums and protocols and sometimes also a router. It speaks DSL, fibre, cable etc. on one end and Ethernet on the other.
A wireless access point is similar in that is also is an “adapter” between mediums but it’s an adapter between physical and wireless. It effectively connects wireless devices to your physical Ethernet network (allowing communication in both directions) and never does any routing.
What you are typically provided by an ISP is an all-in one box that contains modem, router, switch, firewall, wireless access point, DHCP server, DNS resolver and more things in one device. For a home network, I wouldn’t want most of these to be separate devices either but at least wireless should be separate because the point of connection for the modem is likely not the location where you need the WiFi signal the most.
Thank you so much for the explanation, I updated the post
Modem translates fiber signals / DSL into twisted pair cable
Acces point translates twisted pair into wifi
I think you are looking for all in one router
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
3 acronyms in this thread; the most compressed thread commented on today has 16 acronyms.
[Thread #550 for this sub, first seen 27th Feb 2024, 12:25] [FAQ] [Full list] [Contact] [Source code]
If your ISP comes via Fixed wireless, PPPoE or fiber, I would suggest getting something like this, and setting it up accordingly with PFSense or OPNSense.
Overkill
Some people don’t believe in God, I don’t believe in overkill 🤣🤣
I would start by seeing if your ISP has a list of supported models. Pretty sure satellite must use the provider’s modem. Cable service is often picky, if that’s what you have. DSL less so. (And I assume you’re not on dialup.)
Fixed wireless, PPPoE, and fiber should all be giving you an Ethernet handoff so you shouldn’t need a modem for those. And if somehow you still have a T1 line, god help you.
Openwrt/ddwrt are used for routers.
In the US you usually need to use your ISP’s modem. Even if you buy the modem, it needs to be one that the ISP supports and the ISP will have more control of the device than you do. Even if it were running openwrt or ddwrt, you would not have access to use it.
I have an Arris modem and it works fine now, but for months there was a bug where it would randomly crash. I don’t know when the bug was fixed, but firmware updates are controlled by the ISP so I had to just reboot it when it would crash. In other words, even if you have good modem hardware, whether it works correctly is up to your ISP.