Even at stores that have this feature, I rarely see people use it. It’s clearly not an experience that people flock to.
OTOH, on the rare occasion I’ve visited a Walmart in the past 10 years, I have a 100% rate of checkout taking an absurdly long time. Everyone there just seems to accept it like they have no choice.
As long as it’s advertised openly, I don’t see a big problem with it. It would probably be sold as a discount for shopping at slower times, though. It’s a tried-and-true method of smoothing congestion.
Assuming a store with 9a-9p hours (every day), a 9-5 worker can shop 44 hours in a week, vs 40 they cannot. But that doesn’t particularly line up with the busy hours. Around here, after 7 on weekdays and 5 on weekends tend to get pretty slow.
I really doubt he will agree to another debate. But the best way for it to begin would be at the beginning, when they thank everyone for making it happen, if she thanked Trump for his donations to her previous campaigns. She wouldn’t be there if it weren’t for donors like him.
It would immediately piss him off for the entire event.
You have to keep in mind the scenarios where it will be used. While truly fast charging does exist today (20 minutes or so for 80% charge), that is not widespread, nor is that the way it’s typically done. Level 3 (DC fast charging) is expensive (moreso than gas), potentially detrimental to the battery, and still usually not very fast (an hour at least). As such, you aren’t going to charge at your local gas station the same way you get a fill up today.
Most people use a level 2 charger, either at home or at work. This means it can sit for 8 hours to refuel. Many parking garages have this as well. Level 2 chargers deliver AC directly to the vehicle, meaning you don’t need a lot of infrastructure- just a 240v line and a billing system. This in turn means it’s cheap and relatively easy to install. Sometimes you’ll see these outside of Starbucks or a grocery store, but not especially often. You’ll get ~25 miles of range per hour charging using level 2. But even if you spend 2 hours drinking coffee, or buying groceries, you’ve only added 50 miles of range.
This is where level 3 comes in. It requires some pretty significant equipment (which is part of why they’re always broken), because it has to convert AC into high voltage DC. It also has to chill the cables internally, otherwise they’d quickly overheat from the electricity passing through. But this takes up space that’s probably not really available in the lot.
I am seeing fast chargers now being installed at travel centers/truck stops along major highways. It fits in nicely with regular stops on a road trip for food. I’m also seeing them being installed at most Walmarts, since that’s perfect for grocery shopping.
Around here, that last group has been from Electrify America, which does NOT require an app. They have a standard credit card reader.
Licensing and activation are separate, and only loosely related. If you are at anything resembling a large org, they don’t even use the HWID or OEM key- they will be using an internal KMS server.
It really sounds like you have way more permissions than you should have on a work device. You should’ve hit a wall even attempting to install Win11 (I can confirm that my work blocks this very effectively). I also question why you would want to do that at all. I’m also not sure you needed to do anything to activate- I believe 10 and 11 use the exact same HWID/keys/etc
Many private trackers, and even a few public ones, have a request forum. The private ones reward users that fill these requests, so they are often effective.
There are some very accessible private trackers (sometimes referred to as semi-private) that meet these requirements. Once you get set up, they can be very set-and-forget. Just avoid the forums.
TorrentLeech has open registration several times per year. Keep an eye on Opentrackers.org for any of these. Note that some are open, while others are open application. The latter means you must meet certain criteria to be accepted. Typically this is proof of your stats on other trackers, but sometimes it’s exclusively for refugees from one that failed.
Keep in mind that you will not ever find open registrations on an established, reputable tracker. They don’t need more users. They only recruit from lesser, more accessible trackers. You will need to start on these to establish yourself. There are plenty of guides on this, with most starting on RED or MAM.
If you aren’t on any of these, it’s not because they’re too hard to get into- it’s because you don’t want to put in the effort. Which is exactly what private trackers want to avoid.
Also, smaller doesn’t always mean bad. TorrentDB was a rising star, with regular open invites, right up until its collapse. Even the giants like PTP started from nothing. Getting in early is a perfectly viable strategy, especially if you help grow it.
The absolute easiest and simplest would be to modify your grub config to have a longer timer on the boot menu, effectively delaying them until the NAS is up.
That doesn’t necessarily mean it’s the best option- there are ways to make the actual boot process wait for mounts, or to stagger the WOL signals, or the solutions others have mentioned. But changing grub is quick and easy.
You’re overlooking a very common reason that people setup a homelab - practice for their careers. Many colleges offer a more legitimate setup for the same purpose, and a similar design. But if you’re choosing to learn AD from a free/cheap book instead of a multi-thousand dollar course, you still need a lab to absorb the information and really understand it.
Granted, AD is of limited value to learn these days, but it’s still a backbone for countless other tools that are highly relevant.
What do you mean by “last”? I know it’s a common term, but when you dig deeper, you’ll see why it doesn’t really make sense. For this discussion, I’m assuming you mean “How long until I need to buy a newer model?”
First, consider the reasons you might have for buying a newer model. The first is hardware failure. Second is obsolescence - the device cannot keep up with newer needs, such as speed, capacity, or interface. The third is insecurity/unsupported from the vendor.
The last one is easy enough to check from a vendor’s product lifecycle page. I’ll assume this isn’t what you’re concerned about. Up next is obsolescence. Obviously it meets your needs today, but only you can predict your future needs. Maybe it’s fine for a single 1080p* stream today, and that’s all you use it for. It will continue to serve that purpose forever. But if your household grows and suddenly you need 3x 4k streams, it might not keep up. Or maybe you’ll only need that single 1080p stream for the next 20 years. Maybe you’ll hit drive capacity limits, or maybe you won’t. We can’t answer any of that for you.
That leaves hardware failure. But electronics don’t wear out (mechanical drives do, to an extent, but you asked about the NAS). They don’t really have an expected life span in the same way as a car battery or an appliance. Instead, they have a failure rate. XX% fail in a given time frame. Even if we assume a bathtub curve (which is a very bold assumption), the point where failures climb is going to be very unclear. The odds are actually very good that it will keep working well beyond that.
Also of note, very few electronics fail before they are obsolete.
*Technically it’s about bitrate, but let’s just ignore that detail for simplicity. We’ll assume that 4k uses 4x as much space as 1080p
TL;DR: It could fail at any moment from the day it was manufactured, or it could outlast all of us. Prepare for that scenario with a decent backup strategy, but don’t actually replace it until needed.
That the market buying internal drives is generally willing to pay more for the product vs the people buying an external drive? Because cost of the parts (AKA Bill of Materials, or BOM) is only a small part of what determines the price on the shelf.
The fact the WD has a whole thing about refusing to honor the warranty (likely in violation of the Magnuson-Moss Warranty Act) should tell you what you really need to know.
The challenge with this is that kids are, for lack of a better term, fucking stupid. Children intrinsically reject all sorts of ideas and values that a functioning adult is expected to have. For instance, sharing, patience, kindness, and virtue. These have to be taught to a child, sometimes through a long and difficult process.
It also doesn’t help that these are vague ideas. For many people, virtue and religion are tied together as one. At what point does a child become autonomous enough to make their own decisions about their values?
I’m all for limiting the idea of overbearing parents, but defining terms and details is going to be nearly impossible.
I disagree about there being no mirror image. There are a ton of “news” sources that you probably dismissed for the same reasons as Fox. It’s not just how far left or right, but of what quality “journalism” is being used. It also plays directly into the far-right’s game of “both sides are the same”.
The mirror of Fox isn’t MSNBC; it’s the Huffington Post.
While Gates has certainly been involved in good causes, it has nothing to do with how he became a billionaire. He employed the same awful practices as every other billionaire, including employing other equally awful now-billionaires (Ballmer/Allen).
Gates’ behavior changed rather suddenly a long time ago. I don’t know what caused it, but he went from cutthroat exploitation to charity work, with little overlap between. I fully agree that he is an outlier, and in more ways than one.
First, a massive amount of content is removed. You won’t find a lot of popular, unencrypted content these days on usenet. It’s all encrypted and obfuscated now to avoid the bots
Speaking of bots, I don’t think you realize how much of this process is automated, or how wide of a net is being used. The media corporations all have enormous collected libraries of material. It gets posted constantly to all sorts of places. This includes public torrents, public usenet, YouTube, PornHub (yes, really, even for non-porn), Facebook, TikTok, Tumblr, GNUtella, DDL sites…
The list goes on and on. Each one gets scanned for millions of potentially infringing items, often daily. No actual people are doing those steps.
Now, throw in things like private torrents, encrypted usenet posts, invite-only DDL, listings that use ‘3’ instead ‘e’ or those other character subscriptions… These require actual humans to process. Humans that cost money, and a considerable amount of it. As a business, you have to show a return on investment. Fighting piracy, even at its theoretical best, doesn’t increase revenues by a lot.
You mention revenue and breaking even, but you left out an important detail. Your time is free. They don’t have to pay $10/month, they have to pay $10/month + $20/hour for someone to deal with it. And most pirates of that level will just find another method.
That was my line of thinking. However, my subdomain.chickenkiller.com frequently (but but universally) resolves to the IP of regular chickenkiller.com. I don’t believe it’s an issue with my config, since my previous domains (not run by josh) worked just fine until they folded.
You know how you need to test any backup solution? This is the same. Have anyone that you’re expecting to do this run through the process entirely from your documentation. If they can’t, adjust the doc/process until they can. Then include that with your will, or with other documents people will be looking through in the event of your death.
It doesn’t matter if they’re making money. Google/Alphabet is a for-profit company. A big part of this means they have to make as much money as possible. MBA programs literally teach that any unrealized potential profit is lost money.
They could rake in a trillion dollars in ads, and they’d still do this if it meant they could get 1.1 trillion instead.
The risk was poorly-made power adapters, where 2 pins could short/arc. These cables were almost exclusively injection molded and sold through cut-rate outlets like Ali Express (and Amazon resellers of them).
Technically crimped cables are not immune, but they are rarely seen with such cost cutting. Quality molded cables are also fine, but that is very difficult to recognize or verify after purchase.
The manual should tell you the power limits, and you can cross-reference the power usage of the drives. It’s probably ok for normal consumer drives, but high-draw or enterprise drives could be an issue. You could also (probably) just get power from the PSU.
I had a terrible experience with them. They are selling drives that previously failed in the data center, but currently pass manufacturer tests. They also wipe SMART. Or at least, they usually do. That’s how I know the first part. I had 4/3 drives fail on me- all of the original set within my burn-in tests, and 1 replacement (before I returned the others for refund) a year later. The last one was clearly meant to be wiped, but had the error still in the SMART logs.
They did have good customer service at least, but the parts are unreliable garbage that should not be trusted.
SuprNova was the big one for me. Everything else was either redundant (Like RARBG) or just faded away (like my Usenet sources). I didn’t have any replacement lined up when SuprNova died.