Toes♀
No one compares You stand alone To every record I own Music to my heart That’s what you are A song that goes on and on
- 1 Post
- 45 Comments
I’d suggest using OVH. https://help.ovhcloud.com/csm/en-ie-dns-dynhost?id=kb_article_view&sysparm_article=KB0051641
Depending on your country you may need to use ovh canada
Syncthing like others suggested is probably the way to go.
But if you want more options you can do a lot with WebDAV. https://www.digitalocean.com/community/tutorials/how-to-configure-webdav-access-with-apache-on-ubuntu-18-04
Actual Cannibal Shia Labeouf Mod for L4D2 is essential.
So many people just open a game and play it, ignoring the settings.
The default controls in StarCraft 2 set you up for failure in custom games. Turning off simple command card and allowing the selection of enemy units helps a ton.
When playing interactive story games like until dawn, try to pick up everything in each room before continuing. Be nice to the animals!
Breath of the wild is more fun if you do the major dungeons in reverse order.
When playing with emulators let the game go through its idle intro card and listen carefully to the sound if it distorts or pops then your game is likely to be unstable try changing more options. Such as enabling interpreter mode for the audio.
When playing Super Mario World, don’t be afraid to explore the stages esp the boo mansions.
When a game offers Vulkan/dx12 mode, try it.
The Nintendo switch allows you to control the MTU of the wifi connection, adjusting this can help in poor connectivity situations.
Changing your DNS to a public provider such as Quad9 can help.
Investigating if you can enable ipv6 on your network can offer you some boons.
Confirming port forwarding is working for your games will help immensely in games that rely on that. (Also resolve any double NAT issues)
Do not attempt to game on a wifi repeater, only sadness follows.
Unless you are playing fallout 3 or New Vegas on era correct hardware there are mods to make it more stable.
Everyone needs to play hat in time.
If your lan devices only have a fe80, your clients are not receiving a proper router advertisement.
Which routes and firewall rules should I be checking?
Since the OPNsense device is getting a ipv6 address and is able to ping ipv6 devices on the internet.
It sounds like you don’t have ipv6 configured for the LAN. Try enabling “Assisted” mode.
Using a whitelist in this manner with cloudflare may be challenging as this list can potentially change. They do have means to query it though. https://developers.cloudflare.com/api/operations/cloudflare-i-ps-cloudflare-ip-details Additionally, have you considered ipv6 support?
if you haven’t solved the problem yet, I would consider switching to Apache for your reverse proxy and using mod_remoteip.
Track the CF-Connecting-IP field instead of the IP address to get the client.
I found this docker option.
https://hub.docker.com/r/apache/james#!
Although it’s pretty cheap to have someone else host it.
Can’t change the files until you’re done seeding.
Peers will ban you and if you’re using a private tracker you can get banned on the site.
Most players have features for adjusting the audio during playback. So unless you’re serving those files to something limited, I don’t see why you need to change them.
That must be a very unfortunate situation where you don’t have control of your network for that to be a concern though. in which case I wouldn’t expect it to be suitable for a internet facing homelab?
Like I’m struggling to think of scenarios for this.
I suppose you could be trying to setup a homelab on a college network or using someone else’s internet connection where you have no input on the matter.
Perhaps, I could see a case for CGNAT like another user mentioned, where the whole town shares an single IP for example. But I’d imagine such a network would offer poor performance.
But in all those scenarios, a VPS is cheaper and you can do everything this service offers and more.
It’s fairly straightforward to do for free with Hurricane Electric. Some home routers even have it built in as an option. https://tunnelbroker.net/
I’m assuming anyone who’s playing around with servers is capable of implementing it.
Go on eBay, punch in the price you’re looking to spend and search for an old server. Keep in mind some manufacturers use proprietary connectors.
Look for servers with lots of ECC ram, clean photos of the internals.
They probably won’t have a drive that’s pretty common.
To meet that 16 core requirement, you’ll probably be looking at older dual socket systems.
Edit: a quick search I found this. https://www.ebay.com/itm/225978893065?
Not a perfect match but the price is pretty good.
Since I’m not too familiar with your environment I’m just going to list some possibilities.
Check that you’re not using a fat16/fat32 filesystem anywhere. Host, Docker, download location. If this is the cause, exfat is supported by Windows and Linux if you need reverse compatibility.
Confirm you’re running the 64bit version.
Can you determine if the problem starts happening around the 4GB size.
Perhaps there’s not enough free space for it to download and copy the file from the temporary location to the destination at the same time.
Perhaps the file name including the path has become too long.
If I was in your IT department I’d be required to shut this down and probably revoke your access until our bosses decide on your future.
Keep in mind, your employer has a responsibility to protect their data and this would subject your homelab to any legal liabilities such as a lawsuit search order and data privacy auditing.
Any solution you work out needs to be signed off on in writing if it’s outside their expected usage.
Another important point o365 requires oauth2 authentication unless your IT department has intentionally allowed other forms of authentication or they are in a hybrid legacy environment.
When they broke EWS and office 2010 compatibility they crippled many foss solutions without an additional license and the tools that do work will report details to exchange about your homelab. So if your department is diligent it’ll come to their attention.
Assuming you have a genuine installer that exception is commonly caused by corrupted or missing system files. (But not the only reason, ram issues, HDD issues and malware are some of the other potential reasons)
Research and understand these commands before using them. They attempt to resolve system file problems. Be sure to reboot after running both of them.
DISM /Online /Cleanup-Image /RestoreHealth
SFC /scannow
Additionally, you can check if you have the latest redistributable installed.
Install both x86 and x64.
https://learn.microsoft.com/en-us/cpp/windows/latest-supported-vc-redist?view=msvc-170
Don’t update the firmware or give it access to the internet.
Assuming it’s old enough, if you put electrical tape over the chip contacts it might work.
Try using a generic PCL3 or 5 driver.
These are some weird workarounds I’ve seen in the wild.
Edit: there’s no way to be certain unless you find another person with your exact situation and firmware that’s done something. Or a thumbs up from the manufacturer.
Ok in that case. The goal is to use a cipher suite that works well on your device that is still secure. AES is accelerated on most processors these days. But you’ll want to confirm that by looking up your specific cpu (both host and client machines!) and checking for AES acceleration.
AES-128-GCM would be my suggestion.
UDP mode provides less overhead, so it should be faster for you.
Alternatively you could use IPsec instead of openvpn but that’s a chore to configure. But it has the benefit of being free and being natively supported by many devices.
You would still want to configure an appropriate cipher suite that’s fast and secure.
- •
- 1Y
- •
Avoiding spam filters and ISP blocks are a common issue with self hosted email.
Ideally you’ll have a mature domain, dkim configured and an IP that’s not blacklisted on a network that allows email traffic.
OVH offers pretty cheap email hosting if you just want a turn key solution.
Otherwise if you want your home lab to work this way you may need to configure something akin to a forward proxy on a VPS to act as a gateway for your homelab.
This could be achieved using wireguard and iptables. By routing the email traffic to your homelab.