What do you guys think of the idea of smart homes? I could make a basic setup using https://home-assistant.io to control my home temperature and lighting; the tools for doing this are everywhere nowadays and implementation doesn’t seem too horrific anymore.
But setting aside what I “can” do, is this something that I “should” do? How can a person implement this without connecting any devices to the internet?
I really like this statement I heard recently, which I think came from the YouTube Adventurous Way - “Dumb Control, Smart Monitoring”. Make sure that any devices you install have failure models that make sense - you should still be able to control your appliances when the network is down.
That said, the option to remotely control lights, etc is fantastic. I also recommend setting up some temperature sensors in various places - I have quite a few ESP33 boards scattered around with sensors (and and one with an IR blaster) attached.
Making sure you are still able to control everything when the network is down seems like a good idea.
In our house, the smart plugs have a physical button that can be used to toggle them on or off. The lights are still connected to a physical power switch, so they can be reset by flipping the switch a few times, in which case they will probably just act as a normal light. Air conditioning units have an IR remote.
All important automations should run fully locally. I also find that focused and simple automations are often most useful. When I say simple I mean in terms of automation logic, not necessarily in terms of interfacing devices, which can be tricky at times. Example of simple automations I like most would be switching amplifiers on/off based on audio state changes, switching lights on/off relative to sunset, and switching electric water and floor heating elements on/off depending on energy price.
I agree, I also make sure everything is fully local. I have separate subnets for the server that runs home assistant, the IoT devices, and the trusted home network. Then I have some firewall rules that ensure that the IoT network cannot communicate with the WAN or the trusted LAN network at all, only with home assistant.
We have some simple automations at home to turn on the boiler in the afternoon when we have an abundance of solar power, and some basic automation to turn off aquarium lights at night such that the fish can sleep. Anything more complex just becomes unreliable and annoying.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !technology@beehaw.org
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
I really like this statement I heard recently, which I think came from the YouTube Adventurous Way - “Dumb Control, Smart Monitoring”. Make sure that any devices you install have failure models that make sense - you should still be able to control your appliances when the network is down.
That said, the option to remotely control lights, etc is fantastic. I also recommend setting up some temperature sensors in various places - I have quite a few ESP33 boards scattered around with sensors (and and one with an IR blaster) attached.
Making sure you are still able to control everything when the network is down seems like a good idea.
In our house, the smart plugs have a physical button that can be used to toggle them on or off. The lights are still connected to a physical power switch, so they can be reset by flipping the switch a few times, in which case they will probably just act as a normal light. Air conditioning units have an IR remote.
All important automations should run fully locally. I also find that focused and simple automations are often most useful. When I say simple I mean in terms of automation logic, not necessarily in terms of interfacing devices, which can be tricky at times. Example of simple automations I like most would be switching amplifiers on/off based on audio state changes, switching lights on/off relative to sunset, and switching electric water and floor heating elements on/off depending on energy price.
I agree, I also make sure everything is fully local. I have separate subnets for the server that runs home assistant, the IoT devices, and the trusted home network. Then I have some firewall rules that ensure that the IoT network cannot communicate with the WAN or the trusted LAN network at all, only with home assistant.
We have some simple automations at home to turn on the boiler in the afternoon when we have an abundance of solar power, and some basic automation to turn off aquarium lights at night such that the fish can sleep. Anything more complex just becomes unreliable and annoying.