I was doing some blacksmithing in high school, mostly knifes.
When reaching 800°C steel is not magnetic anymore, it’s also a good temperature to start forging the steel. So I needed a atrong magnet to know when the steel was hot enough, I used what I have available: a hard drive magnet.
It felt quite “mad-maxy” to disassemble a broken hard drive to use it as a tool to forge knifes
That’s rad, and you did an amazing job keeping them whole. Recently I have been wrapping them in cloth, then the kids form clay around them for various fridge and office magnets.
That’s a good idea. Yeah, the trick I discovered in getting them off the mounting bracket without the chrome plating peeling is to grab each end of the bracket with vice grips and/or pliers (after you unscrew it from the drive) and just bend it down and away from the magnet. They usually come off in one piece that way, too.
Cool, I’ll try this next time. So far the least damaging way I’ve tried is putting the thing in hot water. The magnet and the base expand by different amounts and it is relatively easy to pry the magnet off. But the thing cools down quickly so it takes a few tries.
I’ve done some of that, recently I have an old putty knife and I will put it right against the crack and just hammer it which will unstick it enough that I can pull it off. Newer drives definitely have weaker magnets than some of my much older ones.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
Thought it was just me. Used to have at least twice this many in my old office:
I was doing some blacksmithing in high school, mostly knifes.
When reaching 800°C steel is not magnetic anymore, it’s also a good temperature to start forging the steel. So I needed a atrong magnet to know when the steel was hot enough, I used what I have available: a hard drive magnet.
It felt quite “mad-maxy” to disassemble a broken hard drive to use it as a tool to forge knifes
Wow it looks like a light sweeper
That’s rad, and you did an amazing job keeping them whole. Recently I have been wrapping them in cloth, then the kids form clay around them for various fridge and office magnets.
That’s a good idea. Yeah, the trick I discovered in getting them off the mounting bracket without the chrome plating peeling is to grab each end of the bracket with vice grips and/or pliers (after you unscrew it from the drive) and just bend it down and away from the magnet. They usually come off in one piece that way, too.
Cool, I’ll try this next time. So far the least damaging way I’ve tried is putting the thing in hot water. The magnet and the base expand by different amounts and it is relatively easy to pry the magnet off. But the thing cools down quickly so it takes a few tries.
I’ve done some of that, recently I have an old putty knife and I will put it right against the crack and just hammer it which will unstick it enough that I can pull it off. Newer drives definitely have weaker magnets than some of my much older ones.