I do that to my dead drives, but I’ve only had one fail that wasn’t an SSD. Moreso because the washers that separate the platters have a very satisfying ring to them that makes me keep them as a fidget toy.
I use the magnets to hold screws, it works great for that.
Unfortunately, SSDs have less interesting parts, so I just take them apart to destroy the chips after failure
I typically use yeti ramblers with a metal bases on them, though I’ve set ceramic mugs down on them too and they’ve not stuck. might depend on the drink a little?
If you wind a 2 or 3 layer pancake coil the size of the platter out of 12 or 14AWG magnet wire and dump a couple kJ through it from a capacitor bank, the platter will launch into the air. Don’t try it indoors unless you want a platter embedded in the ceiling.
I will keep the magnets if I ever get into this in the future, but not the platters. I’ll just safely destroy them and dispose of them.
So far I only had 3 laptops and no desktops. I had 0 HDD failures, since I only ever had 3 of them so far.
The oldest one is more than 17 years old 80GB 2.5" Fujitsu HDD.
Back in the day, I’d go through HDDs faster than systems-always needed to add storage before I could replace the CPU. I didn’t start disassembling them until they got up to the 500 _M_B range, but you’d often get 3 platters back then. OP must be harvesting from a whole workgroup - I’ve only got a 3cm stack and 7 drives waiting for the screwdriver.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
I do that to my dead drives, but I’ve only had one fail that wasn’t an SSD. Moreso because the washers that separate the platters have a very satisfying ring to them that makes me keep them as a fidget toy.
I use the magnets to hold screws, it works great for that.
Unfortunately, SSDs have less interesting parts, so I just take them apart to destroy the chips after failure
… I didn’t but I guess I could start?
deleted by creator
Challenge accepted. I’ll post our collection tomorrow! I used some magnets to hold up a white board last week too. Hahaha
The mad god thrown of victory!
I use them as coffee mats…
I do that with save icons!
The 3.5s make for excellent coasters lol
How do you keep them from sticking onto cups
Good question, but I’ve not had that issue so far
I typically use yeti ramblers with a metal bases on them, though I’ve set ceramic mugs down on them too and they’ve not stuck. might depend on the drink a little?
Oh it’s probably vacuum sealed then so it doesn’t condensate
Maybe but I do spill a bit every now and then. Can’t speak for the regular ceramic mugs, though that’s a bit of a rarity and they just have herbal tea
No but now I know what to do with my old hard drive that failed :)
Yes. Got to admit mine just isn’t as big as yours, though.
Yes. The magnets are ridiculously strong. Several hold screen in place on my heat exchanger, to keep leaves and lawn debris at bay.
Haven’t figured out a good use for the platters, but skeet shooting has crossed my mind.
If you wind a 2 or 3 layer pancake coil the size of the platter out of 12 or 14AWG magnet wire and dump a couple kJ through it from a capacitor bank, the platter will launch into the air. Don’t try it indoors unless you want a platter embedded in the ceiling.
Zombie apocalypse DIY railgun
I will keep the magnets if I ever get into this in the future, but not the platters. I’ll just safely destroy them and dispose of them.
So far I only had 3 laptops and no desktops. I had 0 HDD failures, since I only ever had 3 of them so far.
The oldest one is more than 17 years old 80GB 2.5" Fujitsu HDD.
Back in the day, I’d go through HDDs faster than systems-always needed to add storage before I could replace the CPU. I didn’t start disassembling them until they got up to the 500 _M_B range, but you’d often get 3 platters back then. OP must be harvesting from a whole workgroup - I’ve only got a 3cm stack and 7 drives waiting for the screwdriver.
The magnets are fantastic for tool mounts since they’re so strong
I use the platters like this as my primary long term storage solution. It just saves so much space without the large enclosures. /s
Ah yes. The famous write-only backup solution :D
You joke but early 90s we had exactly this with magneto optical drives
Macabre.
Yet also (bitter-)sweet, those drives gave everything they had for you, it’s only right to honor their memory & remember them.
I just open the drives & put them on shelves.
I use SSDs
In a distant post-apocalyptic future, the survivors will use hard drive platters as a currency.
Techno-shamanism! I made a dream-catcher made from some plates.
I made a wind chime once that I really loved. Had to dirty the plates because they could catch the sun well enough to vaporize your retinas
I heard they keep data corruption away.
I made a DRAM catcher once.
Oh wow!
Dude’s the Predator of the IT world
Pretty sure that title is firmly held by mcafe, even now.