About 45W for my router, fiber endpoint, switch, three wireless APs and a Pi4 running Home Assistant. I’ve got a synology running separately that I suspect uses more, but I haven’t measured it recently. Thinking about putting the synology in the crawlspace as it’s kinda loud.
My Grafana dashboard says 81 watts at the moment. This includes a slightly beefy Intel computer running Proxmox, with a Kubernetes cluster inside, a few other small ARM servers, and my networking stack which is a router, 1 switch, 1 AP, and a modem. Also the main server is full of spinning rust disks. I haven’t done much to optimize power consumption.
I’ve got:
R720 w/ 2697v2s, 12 hdds
Some Intel 2011 box w/ 2667v2s
A custom AM5 server w/ 7700x, 8 hdds
An old Cisco enterprise 48 port (&4 SFP+) switch
It seems to hover ~800w.
I’m looking into replacing a lot of it especially the Intel server because it’s used for just pfSense.
Mine has been idling around 300-400 watts. I’ve recently been making some changes that have it running more than usual. I’m hoping in the next week I will get it back below 300 watt idle.
With the space I have and the current cost of solar panels I basically offset the entire labs electric usage with about $800 worth of solar gear. So I haven’t stressed too much about electric use.
I went with simple micro-inverters (https://www.amazon.com/dp/B09N8T2741/)
paired with some standard panels (https://www.amazon.com/dp/B0BRKK73QN/)
Micro-inverters can’t be used when doing a full off-grid system but they are great at reducing energy bills. Super easy install that required no change to my home’s electric circuits.
Currently my UPS is reporting 207 watts, that’s with a unraid server (3600 + 32GB ram + 2060 super for plex, and 6 drives), a mini pc for pf sense, a rpi 4 running pihole and vpn server, a single poe ap, a modem, and security cameras… it can spike to 250w with multiple encodes going on from family … but overall not bad… I did have a dedicated 20A switch installed for just my network closet as well
Between 3 switches, 4 servers, and my desktop also using one of my UPS units, I average about 850w, with peaks up to 1.1kw when my desktop is running. Luckily, electricity where I live is only 13cents/kwh.
I’m not saying that cost of power is entirely irrelevant.
I’m saying that “My setup consumes a lot of power, but that’s fine because it doesn’t cost me much” is kind of backwards.
While monetary cost certainly is one of the arguments for energy efficiency, responsibly using resources and avoiding wasting energy are way more compelling ones imo. That especially applies if your energy isn’t produced via renewable means.
Even if power was entirely free of monetary cost, you shouldn’t waste it, don’t you agree?
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
deleted by creator
I think I’m at 225 watts.
HP ProLiant us using 125 to 150 mostly, synology nas that consumes about 30, and I think the ubiquity stuff takes about 75 watts
About 45W for my router, fiber endpoint, switch, three wireless APs and a Pi4 running Home Assistant. I’ve got a synology running separately that I suspect uses more, but I haven’t measured it recently. Thinking about putting the synology in the crawlspace as it’s kinda loud.
My Grafana dashboard says 81 watts at the moment. This includes a slightly beefy Intel computer running Proxmox, with a Kubernetes cluster inside, a few other small ARM servers, and my networking stack which is a router, 1 switch, 1 AP, and a modem. Also the main server is full of spinning rust disks. I haven’t done much to optimize power consumption.
I’ve got:
R720 w/ 2697v2s, 12 hdds Some Intel 2011 box w/ 2667v2s A custom AM5 server w/ 7700x, 8 hdds An old Cisco enterprise 48 port (&4 SFP+) switch It seems to hover ~800w.
I’m looking into replacing a lot of it especially the Intel server because it’s used for just pfSense.
Dual Xeon 2640v3, Quadro P2000, 6 mechanical HDDs, 5 SSDs, 8 port LSI HBA.
How did you get that graph
Looks like a graph from a power meter displayed in Home Assistant to me.
Asrock X300 Mini with 2x HDD 2 TB 2,5" drives in Raid1, NVMe Samsung, 1 TB 2,5" HDD connected via USB and Zigbee gateway
100W or so.
Average usage for me hovers around 180-200W. I’m running the following:
Given all it does for me, I’m ok with the tradeoff.
Mine has been idling around 300-400 watts. I’ve recently been making some changes that have it running more than usual. I’m hoping in the next week I will get it back below 300 watt idle. With the space I have and the current cost of solar panels I basically offset the entire labs electric usage with about $800 worth of solar gear. So I haven’t stressed too much about electric use.
What did you get to offset the cost? I’d like to do something but idk where to start looking.
I went with simple micro-inverters (https://www.amazon.com/dp/B09N8T2741/) paired with some standard panels (https://www.amazon.com/dp/B0BRKK73QN/) Micro-inverters can’t be used when doing a full off-grid system but they are great at reducing energy bills. Super easy install that required no change to my home’s electric circuits.
25w pc with 3 SSDs and idk how much w for rpi running 2nd pihole
Currently my UPS is reporting 207 watts, that’s with a unraid server (3600 + 32GB ram + 2060 super for plex, and 6 drives), a mini pc for pf sense, a rpi 4 running pihole and vpn server, a single poe ap, a modem, and security cameras… it can spike to 250w with multiple encodes going on from family … but overall not bad… I did have a dedicated 20A switch installed for just my network closet as well
110w ish. A Dell server with SSDs 370G ram, 2 sockets.
370G RAM ?!
Between 3 switches, 4 servers, and my desktop also using one of my UPS units, I average about 850w, with peaks up to 1.1kw when my desktop is running. Luckily, electricity where I live is only 13cents/kwh.
I really don’t like how people most commonly try to justify the monetary cost of their power consumption.
In my opinion the way more important metrics should be how the energy you are consuming is generated and how much carbon emissions are caused by it.
Who cares that your 2000W@230V idle are “free”, if that means you are burning crude oil in your backyard to generate it…
My wallet
I’m not saying that cost of power is entirely irrelevant.
I’m saying that “My setup consumes a lot of power, but that’s fine because it doesn’t cost me much” is kind of backwards. While monetary cost certainly is one of the arguments for energy efficiency, responsibly using resources and avoiding wasting energy are way more compelling ones imo. That especially applies if your energy isn’t produced via renewable means.
Even if power was entirely free of monetary cost, you shouldn’t waste it, don’t you agree?
~ 5 watts when I ran everything on an old laptop
~ 40 on my new desktop server