EDIT : I’m going to use a Lenovo P500 (at around $130) with 8 threads (will upgrade it later) and 64gb of RAM. It support the E5 v4 family so that’s great. If someone knows the power consumption, that would be cool!
Hello, I want to build a “homelab” and I’m searching for a server, what do you propose me as good options?
I need something with at least 64gb RAM, can buy used, and minimum 16vcores…
Around 150$
If you have any good options let’s comment below 👇 THX ❤
Got a 490W or 650W PSU. Looks like the CPU is probably around 9-10 years. I’d say probably not much. I bet it’s idling would be around 120-200W depending on # of disks, disk type, and if your using the PCI slots.
For reference I’m running 4 Intel NUC11i7s, $400/unit bare metal, 64GB ram (2x32) $120-$130, and the most expensive part is the flash storage I am buying to fit my needs. Power on these are like 10W idle and max is like 60W each when using turbo.
I am not the best at estimating power usage but like I said depends on the configuration it has. That’s just CPU, not including powering everything else so it’s idle load will be higher. RAM, disks, type of disk, amount of disks, GPU or other PCI cards, etc every additional component adds to the idle watt usage.
They have some measurements from their machine though depending on GPU and CPU at least it’ll probably be higher. Also, if your hosting stuff 24/7 your CPU load won’t be 100% idle so you certainly would be higher than it depending on what you host.
Server CPUs are built for the workload (hosting / background services) rather than desktop applications for consumer PCs. That being said generally your going to be more limited in disk / ram than CPU unless if you have some specific needs.
In my setup, my server resources are averaging 10% cpu, 54% memory, and ~70% storage. I’m running 4 PCs, 8 cores each so 32 cores, currently on memory I got 2x64GB and 2x16GB so 160GB ram. Between CPU and RAM I am utilizing basically 3.2 cores worth of processing and 86GB of ram. Most of my ram is going to postgres databases for speed improvement and it takes off load from the CPU.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
The hidden cost of power usage could be a lot more expensive then something more modern though lol
Agreed. 100% would not recommend going this route for a homelab, but it does meet every specified requirement
Look at my edit do you think it’s better?
https://psref.lenovo.com/syspool/Sys/PDF/ThinkStation/ThinkStation_P500/ThinkStation_P500_Spec.PDF
Got a 490W or 650W PSU. Looks like the CPU is probably around 9-10 years. I’d say probably not much. I bet it’s idling would be around 120-200W depending on # of disks, disk type, and if your using the PCI slots.
For reference I’m running 4 Intel NUC11i7s, $400/unit bare metal, 64GB ram (2x32) $120-$130, and the most expensive part is the flash storage I am buying to fit my needs. Power on these are like 10W idle and max is like 60W each when using turbo.
do you think that this thing would be around 150W?? I think more about 50W Max, for example the cpu is relatively low-power
I am not the best at estimating power usage but like I said depends on the configuration it has. That’s just CPU, not including powering everything else so it’s idle load will be higher. RAM, disks, type of disk, amount of disks, GPU or other PCI cards, etc every additional component adds to the idle watt usage.
for sure but even with all my stuff I think that something like that would draw around 40-50W idle and up to 90W running
Found this https://www.tweaktown.com/reviews/6943/lenovo-thinkstation-p500-tower-workstation-review/index.html#Power-Consumption-and-Final-Thoughts
They have some measurements from their machine though depending on GPU and CPU at least it’ll probably be higher. Also, if your hosting stuff 24/7 your CPU load won’t be 100% idle so you certainly would be higher than it depending on what you host.
Do you think it would be better to go to an consumer cpu instead of a xeon?
Server CPUs are built for the workload (hosting / background services) rather than desktop applications for consumer PCs. That being said generally your going to be more limited in disk / ram than CPU unless if you have some specific needs.
In my setup, my server resources are averaging 10% cpu, 54% memory, and ~70% storage. I’m running 4 PCs, 8 cores each so 32 cores, currently on memory I got 2x64GB and 2x16GB so 160GB ram. Between CPU and RAM I am utilizing basically 3.2 cores worth of processing and 86GB of ram. Most of my ram is going to postgres databases for speed improvement and it takes off load from the CPU.
ok
For comparison, I run a thinkstation p300 with i7-4790 (TDP 84W) 24/7 and the power usage looks like this:
Even when idling this old processor still guzzles 45W. Certainly not as nice as GP’s that only use 10W during idle.
hummm… yeah that’s a bit power hungry