Hi,
I am planning to setup a home servering can get a remote desktop on via the webinterface Guacamole. I havehadit ona huge Servet before but this Time I really need it to Bea fanless server.
I need 32gb+ of ram and at least 1tb SSD. Enough CPU power to serve a linux desktop running in lxd via a quacamole in a docker image.
Any recommendationsfor good hardware that isnt crazy expensive?
I just picked up a Monsterlabo: The First, it is all heatsink for the top 2/3rds so your CPU and GPU are completely fanless, I’m searching for a fanless PSU now. It will be a dead silent PC.
The performance target of “linux desktop running lxd” and the price tag “not crazy expensive” is not very clear…
I would personally look for a fanless barebone pc and equip it with as much RAM and storage as you like. One example for this could be the Zotac ZBOX CI629, which you can get for around 400 Euros and has a 13th gen Intel i3 built in.
Yes i would say 1000-1200euro tops for the budget with option to add more ram later.
Would you think i3 is enough? I am not too familiar with the newer generations
Even a raspberry pi can run linux with an lxd desktop, and this i3 is a few times faster than a raspberry pi. But it depends on what you want to with it…
Then you probably don’t need 32 GB RAM, unless you’ve measured actual in-use RAM and found that you need it. Halve it to 16 GB and you’ll probably find more options.
Correction, Raspberry pi zero can run lxd, been there done that. So if that’s all OP wants a $10 computer should do it, he really needs to be more specific.
I have built mine this way, reusing a very old ‘normal’ tower case:
Take a CPU with limited TDP, like 35W or 65W. Use a passive CPU cooler. Use a semi-passive power supply that is too strong for the actual need, so it’s going to stay in it’s passive state all the time - they are cheaper than the real passive ones.
Then use 1 really large fan (25 or 30 cm) that goes at the side of the tower case. It turns very slow because of it’s size, so it is nearly inaudible. No other fans.
You can get 12V power dividers that plug into a 120 watt laptop adapter, if you keep your energy requirements down it saves quite a bit of space, noise and cost
If you’re putting it in a box it is going to cook itself to death regardless of its need or lack of need for fans. If you’re putting it on a dirty floor convection is going to move the dust into it anyways.
If youre putting it in a shop, consider hardware purpose built for that.
Decide on the case first, and it’s going to dictate most of your further decisions.
For example, you cannot use a simple passive CPU cooler in a standard case without any fans, because they need some reasonable air flow all the time. I would guess you need heat pipes instead, and coolers on the outside - but I have no actual experience in that area.
Monsterlabo makes fanless cases, almost all heatsink, with upward airflow. There is another bramd where heatpipes attach to outerside aluminum finned panels, but I forget the name
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
I just picked up a Monsterlabo: The First, it is all heatsink for the top 2/3rds so your CPU and GPU are completely fanless, I’m searching for a fanless PSU now. It will be a dead silent PC.
Have a look at Serve The Home
(IMHO - more specifically their youtube channel)
They did a load of reviews “recently” (months ago) and I ended up buying a fanless / passively cooled box with multi-Gb NICs that is serving me well.
The performance target of “linux desktop running lxd” and the price tag “not crazy expensive” is not very clear…
I would personally look for a fanless barebone pc and equip it with as much RAM and storage as you like. One example for this could be the Zotac ZBOX CI629, which you can get for around 400 Euros and has a 13th gen Intel i3 built in.
Is this within your budget?
Yes i would say 1000-1200euro tops for the budget with option to add more ram later. Would you think i3 is enough? I am not too familiar with the newer generations
Even a raspberry pi can run linux with an lxd desktop, and this i3 is a few times faster than a raspberry pi. But it depends on what you want to with it…
I need it for normal desktop use. Email, coding, browsing (no gaming)
Then you probably don’t need 32 GB RAM, unless you’ve measured actual in-use RAM and found that you need it. Halve it to 16 GB and you’ll probably find more options.
Correction, Raspberry pi zero can run lxd, been there done that. So if that’s all OP wants a $10 computer should do it, he really needs to be more specific.
Spend an hour or two at https://www.cpubenchmark.net/
Lenovo M90n or similar
fanless nuc with i7 is ~600€
I have built mine this way, reusing a very old ‘normal’ tower case:
Take a CPU with limited TDP, like 35W or 65W. Use a passive CPU cooler. Use a semi-passive power supply that is too strong for the actual need, so it’s going to stay in it’s passive state all the time - they are cheaper than the real passive ones.
Then use 1 really large fan (25 or 30 cm) that goes at the side of the tower case. It turns very slow because of it’s size, so it is nearly inaudible. No other fans.
You can get 12V power dividers that plug into a 120 watt laptop adapter, if you keep your energy requirements down it saves quite a bit of space, noise and cost
I need it to be completely without fans due to the location where I need it.
If you’re putting it in a box it is going to cook itself to death regardless of its need or lack of need for fans. If you’re putting it on a dirty floor convection is going to move the dust into it anyways.
If youre putting it in a shop, consider hardware purpose built for that.
OK. Then you have to think very differently.
Decide on the case first, and it’s going to dictate most of your further decisions.
For example, you cannot use a simple passive CPU cooler in a standard case without any fans, because they need some reasonable air flow all the time. I would guess you need heat pipes instead, and coolers on the outside - but I have no actual experience in that area.
Monsterlabo makes fanless cases, almost all heatsink, with upward airflow. There is another bramd where heatpipes attach to outerside aluminum finned panels, but I forget the name
Look up industrial mini PCs maybe?