Oh this is cool! It reminds me of aeGis from CyanogenMod back in the day.

Ahh, thank you! I’ve been banging my head against a wall trying to figure out how to do this.

Well that’s the thing, there’s no git user. I’m trying to directly ssh into the gogs container through the tailscale sidecar container via the tailnet, so I’m not going through the host machine. I’m just trying to see if there’s a way I can do it that’s a bit less fiddly than having to rebuild the container with the right user and whatnot.

Yeah and I figured that was the case. I’m just trying to figure out the best practice for my use case would be as I’d rather not have to build a new container. Also I’ve included the vvverbose output of the SSH attempt below.

❯ ssh -vvvT git@gogs.tailacbd65.ts.net OpenSSH_9.8p1, OpenSSL 3.2.1 30 Jan 2024 debug1: Reading configuration data /data/data/com.termux/files/usr/etc/ssh/ssh_config debug3: expanded UserKnownHostsFile ‘~/.ssh/known_hosts’ -> ‘/data/data/com.termux/files/home/.ssh/known_hosts’ debug3: expanded UserKnownHostsFile ‘~/.ssh/known_hosts2’ -> ‘/data/data/com.termux/files/home/.ssh/known_hosts2’ debug1: Authenticator provider $SSH_SK_PROVIDER did not resolve; disabling debug2: resolving “gogs.tailacbd65.ts.net” port 22 debug3: resolve_host: lookup gogs.tailacbd65.ts.net:22 debug3: channel_clear_timeouts: clearing debug3: ssh_connect_direct: entering debug1: Connecting to gogs.tailacbd65.ts.net [100.126.96.115] port 22. debug3: set_sock_tos: set socket 3 IP_TOS 0x48 debug1: Connection established. debug1: identity file /data/data/com.termux/files/home/.ssh/id_rsa type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_rsa-cert type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ecdsa type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ecdsa-cert type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ecdsa_sk type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ecdsa_sk-cert type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ed25519 type 3 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ed25519-cert type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ed25519_sk type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_ed25519_sk-cert type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_xmss type -1 debug1: identity file /data/data/com.termux/files/home/.ssh/id_xmss-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_9.8 debug1: Remote protocol version 2.0, remote software version Tailscale debug1: compat_banner: no match: Tailscale debug2: fd 3 setting O_NONBLOCK debug1: Authenticating to gogs.tailacbd65.ts.net:22 as ‘git’ debug1: load_hostkeys: fopen /data/data/com.termux/files/home/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts2: No such file or directory debug3: order_hostkeyalgs: no algorithms matched; accept original debug3: send packet: type 20 debug1: SSH2_MSG_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2_MSG_KEXINIT received debug2: local client KEXINIT proposal debug2: KEX algorithms: sntrup761x25519-sha512@openssh.com,curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256,ext-info-c,kex-strict-c-v00@openssh.com debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,sk-ssh-ed25519-cert-v01@openssh.com,sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,rsa-sha2-512-cert-v01@openssh.com,rsa-sha2-256-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com lman-group14-sha1,kex-strict-s-v00@openssh.com debug2: host key algorithms: rsa-sha2-256,rsa-sha2-512,ssh-rsa,ecdsa-sha2-nistp256,ssh-ed25519 debug2: ciphers ctos: aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr debug2: ciphers stoc: aes128-gcm@openssh.com,aes256-gcm@openssh.com,chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr debug2: MACs ctos: hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-sha1-96 debug2: MACs stoc: hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1,hmac-sha1-96 debug2: compression ctos: none debug2: compression stoc: none debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug3: kex_choose_conf: will use strict KEX ordering debug1: kex: algorithm: curve25519-sha256 debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug3: send packet: type 30 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug3: receive packet: type 31 debug1: SSH2_MSG_KEX_ECDH_REPLY received debug1: Server host key: ssh-ed25519 SHA256:obfuscation! debug1: load_hostkeys: fopen /data/data/com.termux/files/home/.ssh/known_hosts2: No such file or directory debug1: load_hostkeys: fopen /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts: No such file or directory debug1: load_hostkeys: fopen /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts2: No such file or directory debug3: hostkeys_find_by_key_hostfile: trying user hostfile “/data/data/com.termux/files/home/.ssh/known_hosts” debug3: hostkeys_foreach: reading file “/data/data/com.termux/files/home/.ssh/known_hosts” debug3: hostkeys_find_by_key_hostfile: trying user hostfile “/data/data/com.termux/files/home/.ssh/known_hosts2” debug1: hostkeys_find_by_key_hostfile: hostkeys file /data/data/com.termux/files/home/.ssh/known_hosts2 does not exist debug3: hostkeys_find_by_key_hostfile: trying system hostfile “/data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts” debug1: hostkeys_find_by_key_hostfile: hostkeys file /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts does not exist debug3: hostkeys_find_by_key_hostfile: trying system hostfile “/data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts2” debug1: hostkeys_find_by_key_hostfile: hostkeys file /data/data/com.termux/files/usr/etc/ssh/ssh_known_hosts2 does not exist The authenticity of host ‘gogs.tailacbd65.ts.net (100.126.96.115)’ can’t be established. ED25519 key fingerprint is SHA256:obfuscation!. This key is not known by any other names. Are you sure you want to continue connecting (yes/no/[fingerprint])? yes Warning: Permanently added ‘gogs.tailacbd65.ts.net’ (ED25519) to the list of known hosts. ha2-nistp521,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,rsa-sha2-512,rsa-sha2-256 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,zlib@openssh.com,zlib debug2: compression stoc: none,zlib@openssh.com,zlib debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug3: send packet: type 5 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug3: kex_input_ext_info: extension server-sig-algs debug1: kex_ext_info_client_parse: server-sig-algs=<ssh-ed25519,sk-ssh-ed25519@openssh.com,sk-ecdsa-sha2-nistp256@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-256,rsa-sha2-512,ssh-rsa,ssh-dss> debug3: kex_input_ext_info: extension ping@openssh.com debug1: kex_ext_info_check_ver: ping@openssh.com=<0> debug3: receive packet: type 6 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 51 debug1: Authentications that can continue: tailscale debug3: start over, passed a different list tailscale debug3: preferred publickey,keyboard-interactive,password debug1: No more authentication methods to try. git@gogs.tailacbd65.ts.net: Permission denied (tailscale).

Ope sorry, right now I just have the serve config doing a redirect of port 22, however when I try to SSH in I get rejected by tailscale ACL. Says there’s no user named git.

If I followed the steps for the vanilla docker setup I’d add a git user to the host and softlink the host authorized_keys file to the gogs container’s version, as well as add a shim script to forward the command into the container using the docker exec command, but I’d rather not do that by mucking about in the sidecar if there’s a better way. The tailscale universal docker mod for linuxserver.io says they have ssh access for their containers but as far as I can tell it just pops in the --ssh flag in tailscale up.

Amazon is working on adding casting capabilities to the Matter framework, but at the moment it’s only implemented in the Echo Show and on Prime video.

So it’s like a LibraryBox with an Archiver?

It usually is with wine lol

You need calibre with the De-DRM extension and an old version of the kindle desktop app.

Yeah this terminology just gives me the impression they don’t consider the AGPL to an actual license

I use FreshRSS in a docker container both served and funneled from my tailscale network (can’t fetch feeds otherwise) and I read it on mobile with FeedMe. My main reason for using FeedMe is the customizable mobilizer though I’m pretty sure you can enable that in FreshRss as well.

This will save you a lot of pain lol

I recently fell into this rabbit hole myself! Though I decided against hosting the blog myself(because I don’t want to do anything stupid lol) Nowadays for sites like that you can install a static site generator to automatically build the site based off of markdown files. I personally use Hugo but I hear good things about Jekyll too.

The way mine is set up I make a post or a page on my machine and push it to my backend github repo. Github detects a change and rebuilds the site with the new content using a github action, then uploads the whole public folder to my host at neocities.

Cobalt.tools worked flawlessly!

EDIT: Ope, thought you were asking lol. Cobalt.tools rocks!

Thats what really kicked me into using obsidian as much as I do.

Basically you can mirror the instapapered versions of your saved pages as markdown files in your obsidian vault. You can customize the whole thing basically so you can put it wherever and have it tie in to your PKM system however you want. I’ve got mine organized in weekly folders with a dataview block in my daily note showing the articles I’ve saved that day.

Literally just set one up yesterday on neocities, it was surprisingly easy. Of course then I managed to break it because I’m not as familiar with git as I’d like to be lol.

I would also like to know this, best I could come up with was one of those electric water cooler pumps that fit over the top of the bottle.

Have you tried going into the setting for the feed itself and using the CSS selector filters? You might be able to cut out the extraneous bits using that.

Oof, that’s what killed my V1 setup lol

They couldn’t effectively serve ads through it lol

I’m trying to find that out myself, just started playing with it yesterday. Right now I’ve got a personal store of recipes in CopyMeThat, and that’s got some nice features like meal planning and shopping lists but its not integrated into anything.

I’ve seen a few approaches so far, some guy on the forums has all the ingredients stored in the front matter and uses dataviewjs to display them in the note which allows for unit conversion but I think that’s too much, I still want to be able to read them without obsidian.

Right now I’ve got tags and method and ingredients in the front matter along with checklist add-on formatted tasks in the main part of the note. Eventually I want to have it pull a recipe at random and put it in my weekly note or something.

I’ve been using copymethat but I’m trying to move to obsidian.

Oh damn I forgot about silverlight. Only thing I used that was for some random Twitter client.

Yeah I honestly forgot about this integration lol. Kinda want to see how I can work it into my setup now.

Im looking at dashy’s widget documentation and it doesn’t look like they have an API query widget quite yet. You could probably output the temp sensor as an RSS feed and pick it up with dashy’s datafeed widget.

Yeah that makes sense. My comment had more to do with the potential of a open source search engine/crawler than anything it currently does. Though I feel the optics feature might be able to account for that eventually.

Your spicy tea link for number 20 is down

EDIT: app of the links I clicked on were down.

Stract.com also looks promising.

No problem! This is hella cool, I kinda wanna try one for my car too.

Looks like someone on reddit was asking a few years ago, hopefully this points you in the right direction.

EDIT: Just got to the bottom of the thread, found THIS.

I found this and this which seems to flesh out what it is pretty well.

The tl;dr is they added some flexibility to the API because since subsonic went closed source everybody’s been working off the original specs which doesn’t account for all the extra bells and whistles that have been added in the past seven years.

I think when mullavad disabled port forwarding it kinda borked it. I ended up getting my *arr docker stack nested in an LXC along with one of those qbittorrent+VPN containers.

Pretty sure you can just manage a remote library from the app, you just gotta point it at your library folder iirc. Also just found COPS, which I’ve never heard of but now I want lol.

Rock raiders and Lego racers was my jam!

You know someone remade the rock raiders game? It’s called Manic Miners.

Did a little digging and this might be a decent starting point! https://www.mundoopensource.com.br/en_page_xmpp_asterisk_pratical_example/

Don’t fork, they go down if the original goes down. Download and reupload.

So just using Calibre to sync your books is kind of a pain in the ass, I agree. Especially with multiple users. However! Sync isn’t the only way of getting books on your devices.

You can set up a locally browsable OPDS catalog for you to download your books from. There should be a bunch of “Calibre server” options in your sharing settings in Calibre, that’s what you’ll need. You can access it from the web browser or your reader’s built-in OPDS browser (most android ebook readers that aren’t dedicated app store portals have one).

That being said you can also install the calibre-web package to your homelab, which hosts the library database and the OPDS server standalone. With that setup you’d only need to use the Calibre app to manage or add books your remote library, either directly or syncing the library database file.

Both of these methods are okay if you want to curate the books on your devices, but if you’re like me and want all the books everywhere sync is ideal. For that I use the Reading List Calibre extension, which lets you create multiple reading lists for multiple devices that are populated with a library search (i.e. “date:<=45daysago” will search for books added to Calibre within the last 45 days) and automatically sync up on device connection.

Best way around that I’ve found is with feedme on android. It’s got a mobilizer with a customizable css selector. Just set the app to load the feed in web view and to use the mobilizer and you’re good to go.