Linear actuator, that’s literally how the commercial units work. Most are step capable either addon or built in and some have built in close resistance tests so you don’t mush the puppy or a kid or whatever is running about your house.
If you just Amazon automatic sliding door linear you’ll get results for units you can wire into your own setup. They’re Chinese but you can use it as a base to build better or simply an example to do the same.
I have a self-filling, self-cleaning water bowl for my dogs. With two Great Danes, keeping the water bowl clean and full is a chore.
Right now it uses a digital timer and does an empty/fill cycle 16 times per day using those capacitive water sensors for the level setting and overflow detection. In a future iteration I plan on incorporating MQTT via WiFi for alerts and manual control.
It is a DIY setup. We had one of those bottle setups like you describe. For my big dogs all it did was slowly become more slobber than water. I realized the problem wasn’t more water but getting rid of the slobber.
Post above describes what I did if you’re interested.
It is a DIY setup. Basically is a sink bowl with the logic of a sump pump with high/low floats (couple of relays and sensors), a fountain pump to drain to a nearby sink, and a valve to fill. The timer drains the water every hour and the fill part is essentially a cheap shower head aimed at an angle so when it is draining and filling at the same time the water is swirling, making it (mostly) self-cleaning. I wipe the inside and outside every week or so just to make sure it is working and isn’t growing anything.
Biggest worry since it is DIY is that something will fail and flood my house. I have a separate high level sensor that closes the valve, starts the pump, and sounds an alarm to help with that, and one of those cheap, warbling 9v water sensors nearby just in case.
Sounds pretty cool, thanks for the details! Any chance of some pictures?
My worry would be the same, I don’t know if I trust myself not to flood the house lol
I did think about using a mechanical float like in the back of a toilet, and an overflow drain in case it never stops filling
New Lemmy Post: A friend joked about making accounts for their dog on self hosted services, so that it could turn lights on and off. What are some unconventional things you’ve seen for pets and homelabs? (https://lemmyverse.link/lemmy.world/post/15702535)
Tagging: #SelfHosted
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
No trolling.
Resources:
selfh.st Newsletter and index of selfhosted software and apps
(image from Wikimedia)
I have a sliding door that I want to toss a stepper motor on, so my dog can push a button and let himself in / out.
Dog tax
Interesting idea. It needs one big stepper motor, I guess. Do you know a specific type that’s strong enough?
Could just use a regular DC motor and limit switches.
Linear actuator, that’s literally how the commercial units work. Most are step capable either addon or built in and some have built in close resistance tests so you don’t mush the puppy or a kid or whatever is running about your house.
If you just Amazon automatic sliding door linear you’ll get results for units you can wire into your own setup. They’re Chinese but you can use it as a base to build better or simply an example to do the same.
That’s one happy cotton ball.
Floof mode engaged.
My dog refuses to do 2FA so that’s not going to happen anytime soon… /s
Yubi key is the solution
My dog authenticates access to back yard with a Yubark Key that works over the wireless audio network.
🥹 Thazs awesome
Sometimes can’t distinguish between a hydrant and a couch so it wouldn’t do a CAPTCHA either
I have a self-filling, self-cleaning water bowl for my dogs. With two Great Danes, keeping the water bowl clean and full is a chore.
Right now it uses a digital timer and does an empty/fill cycle 16 times per day using those capacitive water sensors for the level setting and overflow detection. In a future iteration I plan on incorporating MQTT via WiFi for alerts and manual control.
What brand is it? I currently have a gravity fed 2 gallon bowl but fully self filling would be great.
It is a DIY setup. We had one of those bottle setups like you describe. For my big dogs all it did was slowly become more slobber than water. I realized the problem wasn’t more water but getting rid of the slobber.
Post above describes what I did if you’re interested.
I would also like to know this, best I could come up with was one of those electric water cooler pumps that fit over the top of the bottle.
Self cleaning? Is it something you made or what’s the name is it? I’d be interested in details either way
I really want a fancier water fountain for my cats but never found a self cleaning one :(
It is a DIY setup. Basically is a sink bowl with the logic of a sump pump with high/low floats (couple of relays and sensors), a fountain pump to drain to a nearby sink, and a valve to fill. The timer drains the water every hour and the fill part is essentially a cheap shower head aimed at an angle so when it is draining and filling at the same time the water is swirling, making it (mostly) self-cleaning. I wipe the inside and outside every week or so just to make sure it is working and isn’t growing anything.
Biggest worry since it is DIY is that something will fail and flood my house. I have a separate high level sensor that closes the valve, starts the pump, and sounds an alarm to help with that, and one of those cheap, warbling 9v water sensors nearby just in case.
Sounds pretty cool, thanks for the details! Any chance of some pictures? My worry would be the same, I don’t know if I trust myself not to flood the house lol
I did think about using a mechanical float like in the back of a toilet, and an overflow drain in case it never stops filling
New Lemmy Post: A friend joked about making accounts for their dog on self hosted services, so that it could turn lights on and off. What are some unconventional things you’ve seen for pets and homelabs? (https://lemmyverse.link/lemmy.world/post/15702535)
Tagging: #SelfHosted
(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md