I’ve been looking into building my own leverless for Tekken, but I want to make sure it’s PS5 compatible. What microcontroller did you use for this project? And thank you for the small boost in determination, I needed it.
I’m using a R.Pi with GP2040-CE firmware. It doesn’t work with PS5, but I have a Brooke USB convertor (that’s just for local events, I only have a PC at home). I used to have the Brooke convertor embedded inside the hitbox but that gave trou le with my Linux PC at home.
Let me know if you need help with the process. If you don’t have woodworking g experience there’s still a very easy way to make this yourself (with some tools).
I play on PC but was looking for PS5 compatability regardless… I eyed up the UFB-Fusion earlier…
As for the case, I have access to lasercut acrylic on my campus so I will try to design a stacked acrylic body (have experience from making keyboards). Still stuck between implementing arcade buttons with loose wiring or if I should make a “daughter”-board PCB with low profile mechanical switch contacts.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !gaming@beehaw.org
From video gaming to card games and stuff in between, if it’s gaming you can probably discuss it here!
Please Note: Gaming memes are permitted to be posted on Meme Mondays, but will otherwise be removed in an effort to allow other discussions to take place.
I’ve been looking into building my own leverless for Tekken, but I want to make sure it’s PS5 compatible. What microcontroller did you use for this project? And thank you for the small boost in determination, I needed it.
I’m using a R.Pi with GP2040-CE firmware. It doesn’t work with PS5, but I have a Brooke USB convertor (that’s just for local events, I only have a PC at home). I used to have the Brooke convertor embedded inside the hitbox but that gave trou le with my Linux PC at home.
Let me know if you need help with the process. If you don’t have woodworking g experience there’s still a very easy way to make this yourself (with some tools).
I play on PC but was looking for PS5 compatability regardless… I eyed up the UFB-Fusion earlier…
As for the case, I have access to lasercut acrylic on my campus so I will try to design a stacked acrylic body (have experience from making keyboards). Still stuck between implementing arcade buttons with loose wiring or if I should make a “daughter”-board PCB with low profile mechanical switch contacts.