This is a non-recharghable magnet paper card from the Bucharest Metro
Its just curiosity, I took the strip from a good card, sticked it to aother good one but it wasnt strong enough.
Thinking about trying it again when im in Bucharest 1 month later
@sarsaparilyptus We’ve got guards on pretty much all the entrances, so the likeliness of you getting caught is pretty big (not guards as in Half Life, with guns or stuff like that, usually it’s just some old guy watching people there, but still).
Of course you can, you’re only striping one at a time. You could put as many as the physical card can hold.
Best way is to apply glue the back using a regular glue stick. Put it in a book for a day till it dries. Then you’ll need to laminate the card with a non glossy coating to protect it.
If I had the misfortune to be required to attempt this for some reason, I would use CA glue and a very steady hand, as well as an edge to smooth the strip once applied.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !technology@beehaw.org
A nice place to discuss rumors, happenings, innovations, and challenges in the technology sphere. We also welcome discussions on the intersections of technology and society. If it’s technological news or discussion of technology, it probably belongs here.
Remember the overriding ethos on Beehaw: Be(e) Nice. Each user you encounter here is a person, and should be treated with kindness (even if they’re wrong, or use a Linux distro you don’t like). Personal attacks will not be tolerated.
Why are you putting a magnet in a card. Won’t that mess up the data stored on the card while being read by the magswipe machine
The magnetic strip is what holds the info on the card. 🤦♂️
OP: Is there any reason you can’t just get a new one issued?
This is a non-recharghable magnet paper card from the Bucharest Metro Its just curiosity, I took the strip from a good card, sticked it to aother good one but it wasnt strong enough. Thinking about trying it again when im in Bucharest 1 month later
Isn’t it easier to just jump the turnstiles?
@sarsaparilyptus We’ve got guards on pretty much all the entrances, so the likeliness of you getting caught is pretty big (not guards as in Half Life, with guns or stuff like that, usually it’s just some old guy watching people there, but still).
@sarmale
Im not triyng to not pay. I pay for it, I dont gain anything for dong this, Im just curios
What are you curious about specifically? The type of glue they used? If transplanting the strip will make it unswipeable?
If I can put 2 stripes on a crad and work
Of course you can, you’re only striping one at a time. You could put as many as the physical card can hold.
Best way is to apply glue the back using a regular glue stick. Put it in a book for a day till it dries. Then you’ll need to laminate the card with a non glossy coating to protect it.
My assumption is they were putting a second seperateagnet on the card to stick it to a fridge or some other metal thing…hence my comment🤦♂️
Can you not just tape it into place?
If I had the misfortune to be required to attempt this for some reason, I would use CA glue and a very steady hand, as well as an edge to smooth the strip once applied.
Sticky tape.
Clear sticky tape does the trick.