Tailscale with the Funnel feature enabled should work for most ISPs, since it’s setup via an outbound connection. Though maybe they’re Super Cunts and block that too.
Nothing is exposed. There are things I want exposed, but I don’t want to keep security patches up to date, even if there is a zero day. I’m looking for someone trustworthy to hire for things that it would be useful to expose, but they are hard to find.
I keep everything behind a VPN so I don’t have to worry much about opening things up to the Internet.
It’s not necessary about the fact that you’re probably fine but more so what the risk to you is if that device is compromised, ex: a NAS with important documents, or the idea that if that device is infected, what can that device access.
You could expose your media server and not worry too much about that device but having it in a “demilitarized zone”, ensuring all your firewall rules are correct and that that service is always updated is more difficult than just one VPN that is designed to be secure from the ground up.
There’s a wid range of opinions on this. Some people only access their services via tunnel, some people open most of their services up to the internet, as long as they’re authenticated. One useful option for https services is to put them behind a reverse proxy that require oauth authentication, which allows you to have services over the internet, without increasing your attack surface. But that breaks apps like Nextcloud and Lemmy, so it’s not a universal option.
As a general rule if it’s a pubic-ish service like Lemmy (more a friends and family than public) or something where I want ready access like auto uploads it has public access, otherwise it’s private. I make it a point to have everything facing outside to have 2FA enabled and/or limit the available sources to known IP ranges.
I currently keep everything LAN-only because I haven’t figured out how to properly set up outside access yet.
(I would like to have Home Assistant available either over the Internet or via VPN so that automations keyed off people’s location outside the home would work.)
Yeah, same, except I tunneled HA out via that Cloudflare daemon. Kinda janky because I cannot use the app with it to do locations, but I can check in on the pets from anywhere.
I cannot get the app to connect to my HA with the current setup. I have Cloudflare doing email verification, and the app doesn’t understand how to collect the cookies to make that possible.
I have used DuckDNS and Nginx to get Home Assistant outside but it was horrible, just constantly breaking. Around Christmas time I bought myself a domain name for a few years and Cloudflare to access it, and it’s been night and day since.
Sure it cost me money but it was far cheaper than a Nabu Casa account.
something like 95% stays local and is remote accessed via wireguard, The rest is stuff I need to host via a hostname with a trusted cert because apps I use require that or if I need to share links to files for work, school etc. For the external stuff I use Cloudflare tunnels just because I use DDNS and want to avoid/can’t use port forwarding. works well for me.
Everything is behind a wireguard vpn for me. It’s mostly because I don’t understand how to set up Https and at this point I’m afraid to ask so everything is just http.
Thank you. It was mostly ment as a joke tho. I’m not actually afraid to ask, but more ignorant because it’s all behind VPN and that’s just so much easier and safer and I know how to do it so less effort. Https is just magic for me at the moment and I like it that way. Maybe one day I’ll learn the magic spells but not today.
All software has issued, such is the nature of software. I always say if you selfhost, at least follow some security related websites to keep up to date about these things :)
few days late here, but that pastebin had some really good feeds 🙏
I noticed the OPML file was labeled FreshRSS and I also use FreshRSS. So I fixed up the feeds and configured FreshRSS to scrape the full articles (when possible) and bypass ads, tracking and paywalls.
I figured I’d pay it forward by sharing my revised OPML file.
I also included some of my other feeds that are related (if you or anyone else is interested).
Some of the feeds are created from scratch since a few if these sites don’t offer RSS, so if the sites change their layout the configs may need to be adjusted a bit, but in my experience this rarely happens.
I had to replace some of the urls with publicly hosted versions of the front-ends I host locally and scrape, but feel free to change it up however you like.
I’ve been using YunoHost, which does this for you but I’m thinking of switching to a regular Linux install, which is why I’ve been searching for stuff to replace YunoHost’s features. That’s why I came across Nginx Proxy Manager, which let’s you easily configure that stuff with a web UI. From what I understand it also does certificates for you for https. Haven’t had the chance to try it out myself tho because I only found it earlier today.
Nearly all of them. Nextcloud, Jellyfin, Vaultwarden, Spacebar, and 2fAuth, all set behind an NGINX Reverse Proxy, SWAG. SWAG made it very easy to set up https and now I can throw anything behind a subfolder or subdomain.
You are not logged in. However you can subscribe from another Fediverse account, for example Lemmy or Mastodon. To do this, paste the following into the search field of your instance: !selfhosted@lemmy.world
A place to share alternatives to popular online services that can be self-hosted without giving up privacy or locking you into a service you don’t control.
Rules:
Be civil: we’re here to support and learn from one another. Insults won’t be tolerated. Flame wars are frowned upon.
No spam posting.
Posts have to be centered around self-hosting. There are other communities for discussing hardware or home computing. If it’s not obvious why your post topic revolves around selfhosting, please include details to make it clear.
Don’t duplicate the full text of your blog or github here. Just post the link for folks to click.
Submission headline should match the article title (don’t cherry-pick information from the title to fit your agenda).
Everything is accessible, but only through n2n vpn.
I use OpenVPN and not expose anything directly.
100% is lan only cause my isp is a cunt
I had the same issue. Wrote another comment here explaining my setup to solve my ISP issue.
Ah, CG-NAT, is it? There are workarounds
NAT to extremes… it’s Starlink so I think I’m almost completely obfuscated from the internet entirely.
quite frankly i don’t really host anything that needs to be accessible from the general Internet so I never bothered with workarounds.
Tailscale with the Funnel feature enabled should work for most ISPs, since it’s setup via an outbound connection. Though maybe they’re Super Cunts and block that too.
Prompt: Super Cunt, photorealistic, in the style of Jill Greenberg.
Nothing is exposed. There are things I want exposed, but I don’t want to keep security patches up to date, even if there is a zero day. I’m looking for someone trustworthy to hire for things that it would be useful to expose, but they are hard to find.
Just VPN back in with WireGuard.
I think it would be better if you just setup auto updating regardless
Most of my things are open to the web but thats kinda nessasary for them to be functional file shairing links, link shortening, mc server etc etc
I keep everything behind a VPN so I don’t have to worry much about opening things up to the Internet. It’s not necessary about the fact that you’re probably fine but more so what the risk to you is if that device is compromised, ex: a NAS with important documents, or the idea that if that device is infected, what can that device access.
You could expose your media server and not worry too much about that device but having it in a “demilitarized zone”, ensuring all your firewall rules are correct and that that service is always updated is more difficult than just one VPN that is designed to be secure from the ground up.
There’s a wid range of opinions on this. Some people only access their services via tunnel, some people open most of their services up to the internet, as long as they’re authenticated. One useful option for https services is to put them behind a reverse proxy that require oauth authentication, which allows you to have services over the internet, without increasing your attack surface. But that breaks apps like Nextcloud and Lemmy, so it’s not a universal option.
As a general rule if it’s a pubic-ish service like Lemmy (more a friends and family than public) or something where I want ready access like auto uploads it has public access, otherwise it’s private. I make it a point to have everything facing outside to have 2FA enabled and/or limit the available sources to known IP ranges.
I currently keep everything LAN-only because I haven’t figured out how to properly set up outside access yet.
(I would like to have Home Assistant available either over the Internet or via VPN so that automations keyed off people’s location outside the home would work.)
Just recommendes something that could help you to someone else here
Yeah, same, except I tunneled HA out via that Cloudflare daemon. Kinda janky because I cannot use the app with it to do locations, but I can check in on the pets from anywhere.
I’m planning to set up a legit VPN sometime soon.
Why can’t you use the app to do locations?
I cannot get the app to connect to my HA with the current setup. I have Cloudflare doing email verification, and the app doesn’t understand how to collect the cookies to make that possible.
Tailscale plugin for HA works flawlessly for me.
I have used DuckDNS and Nginx to get Home Assistant outside but it was horrible, just constantly breaking. Around Christmas time I bought myself a domain name for a few years and Cloudflare to access it, and it’s been night and day since.
Sure it cost me money but it was far cheaper than a Nabu Casa account.
something like 95% stays local and is remote accessed via wireguard, The rest is stuff I need to host via a hostname with a trusted cert because apps I use require that or if I need to share links to files for work, school etc. For the external stuff I use Cloudflare tunnels just because I use DDNS and want to avoid/can’t use port forwarding. works well for me.
The only acessible element is the webserver. Fileserver, home automation, octopi, proxmox, media, etc etc are all isolate.
Jellyfin and Miniflux are internet facing because it would be turbo annoying otherwise to deal with them
Just my Nextcloud and Matrix
Everything is behind a wireguard vpn for me. It’s mostly because I don’t understand how to set up Https and at this point I’m afraid to ask so everything is just http.
Its not hard really, and you shouldn’t be afraid to ask, if we don’t ask then we don’t learn :)
Look at Caddy webserver, it does automated SSL for you.
Thank you. It was mostly ment as a joke tho. I’m not actually afraid to ask, but more ignorant because it’s all behind VPN and that’s just so much easier and safer and I know how to do it so less effort. Https is just magic for me at the moment and I like it that way. Maybe one day I’ll learn the magic spells but not today.
Careful with Caddy as its had a few security issues.
All software has issued, such is the nature of software. I always say if you selfhost, at least follow some security related websites to keep up to date about these things :)
Do you have any suggestions for reputable security related websites?
too many :) Here is a snippet of my RSS feed, save it as an xml file and most rss reeders should be able to import it :) https://pastebin.com/q0c6s5UF
few days late here, but that pastebin had some really good feeds 🙏 I noticed the OPML file was labeled FreshRSS and I also use FreshRSS. So I fixed up the feeds and configured FreshRSS to scrape the full articles (when possible) and bypass ads, tracking and paywalls.
I figured I’d pay it forward by sharing my revised OPML file.
I also included some of my other feeds that are related (if you or anyone else is interested).
Some of the feeds are created from scratch since a few if these sites don’t offer RSS, so if the sites change their layout the configs may need to be adjusted a bit, but in my experience this rarely happens.
I had to replace some of the urls with publicly hosted versions of the front-ends I host locally and scrape, but feel free to change it up however you like.
https://gist.akl.ink/Idly9231/22fd15085f1144a1b74e2f748513f911
Thank you :)
I’ve been using YunoHost, which does this for you but I’m thinking of switching to a regular Linux install, which is why I’ve been searching for stuff to replace YunoHost’s features. That’s why I came across Nginx Proxy Manager, which let’s you easily configure that stuff with a web UI. From what I understand it also does certificates for you for https. Haven’t had the chance to try it out myself tho because I only found it earlier today.
NPM is the way. SSL without ever needing to edit a config file.
NPM is nice and easy to use.
Nearly all of them. Nextcloud, Jellyfin, Vaultwarden, Spacebar, and 2fAuth, all set behind an NGINX Reverse Proxy, SWAG. SWAG made it very easy to set up https and now I can throw anything behind a subfolder or subdomain.